The illustrated glossary

Inside your appliance. Parts, in plain English.

Learn what each part does before you call, so you and the technician talk about the same thing.

Brass water inlet solenoid valve with a black coil, two terminals and a threaded hose fitting on a bench.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work
White refrigerator water filter cartridge lying on a dark stone surfaceFamiliar names.
Details worth knowing.

Range words, explained

What the oven is made of.

Refrigerator water filter
The water filter cleans the water that goes to your dispenser and ice maker. Frigidaire says to change it about every six months, and after a new one goes in you need to prime and purge the system. A filter that is loose, cracked or frozen can mean slow or no water, or a leak inside the cabinet.
Gas burner and ignitor
On a Frigidaire gas range each surface burner has a cap, a burner head and an electronic ignitor that sparks when you turn the knob to Lite. If a burner won’t light, Frigidaire starts with the knob, the caps, the ports and the power cord. The oven’s bake burner is a different part, and some gas ranges are under CPSC recall 26-333 for it.
Dishwasher drain pump
The drain pump moves used water out of the dishwasher. Frigidaire’s noise guide describes its hum as steady at first, then changing as the last water goes out. For i20 Frigidaire checks the hose, the disposer plug and the filters; i50 covers a problem with the drain or wash motor.
Open the glossary

Water in and out.

Part

Water inlet valve

The water inlet valve opens to let supply water into the appliance, and shuts to stop it. Frigidaire’s guides name it for dishwasher codes i10 and i30, for refrigerator ice maker and dispenser water, and for washer filling. Hissing or buzzing as it opens is normal.

Part

Refrigerator water filter

The water filter cleans the water that goes to your dispenser and ice maker. Frigidaire says to change it about every six months, and after a new one goes in you need to prime and purge the system. A filter that is loose, cracked or frozen can mean slow or no water, or a leak inside the cabinet.

Part

Dishwasher filter and glass trap

The filter system at the bottom of the dishwasher tub catches food soil so it doesn’t clog the drain. Frigidaire’s guide covers a coarse filter and a cylinder fine filter, which also catches glass, bones and pits. A clogged one is behind i20 and i40, poor cleaning and slow draining.

Part

Dishwasher drain pump

The drain pump moves used water out of the dishwasher. Frigidaire’s noise guide describes its hum as steady at first, then changing as the last water goes out. For i20 Frigidaire checks the hose, the disposer plug and the filters; i50 covers a problem with the drain or wash motor.

Part

Washer drain pump and filter

The drain pump pushes water out of the washer. On Frigidaire’s front-load washer it has a pump filter behind a small cleanout door, and a clogged filter is one cause of a washer that won’t drain. The manual says a humming or gurgling pump is normal. Pumping sounds that change to rattling may point to something in the pump.

Heat, flame and air.

Part

Gas burner and ignitor

On a Frigidaire gas range each surface burner has a cap, a burner head and an electronic ignitor that sparks when you turn the knob to Lite. If a burner won’t light, Frigidaire starts with the knob, the caps, the ports and the power cord. The oven’s bake burner is a different part, and some gas ranges are under CPSC recall 26-333 for it.

Part

Oven door gasket

The oven door gasket is the woven seal around the oven door. Frigidaire’s manuals say not to clean, rub or remove it, because the weave is what seals the door. A torn, worn, detached or missing gasket lets heat out, and the oven can struggle to preheat.

Part

Dishwasher heating element

The heating element warms the water and helps dry the load. Frigidaire’s manual lists it among the dishwasher’s parts and warns that it stays hot, so let it cool before cleaning the tub. i60 means a problem with water heating, and HO or Hd means Heat Delay or Heater On mode, a heating step rather than a problem.

Part

Dryer lint filter

The lint filter catches lint so air can flow through the dryer. Frigidaire says to clean it before or after every load, since a clogged filter makes drying slower and lint is a fire risk. Wash it in warm soapy water now and then to clear the waxy film that fabric softener sheets leave behind.

Part

Dryer exhaust duct and vent hood

The exhaust duct and vent hood carry hot, damp air and lint out of the house. Frigidaire says to inspect and clean the outdoor exhaust about every 18 months, because a clogged duct slows drying. A gas dryer must never run without a duct that vents outdoors.

Which part, which problem, which code.

Every part here connects to the problems it can lead to and the codes that mention it.

Here to help

Good questions.
Clear answers.

Talk to our team
What does the glossary explain?

Everyday words that come up in manuals and on our pages, such as filter, gasket, igniter or sensor. Each entry is a plain description, not a repair instruction.

Is a glossary entry the same as a diagnosis?

No. Knowing what a part does does not tell you whether yours has failed. Use the glossary to follow a manual or a technician's explanation, not to pick a part to buy.

Can I buy a part from the photo?

We would not. One appliance line has many generations, and the same-looking part can differ between them. A technician matches any part to your model number first.

Why are some terms linked to guides?

The link leads to a page that uses the term in a real task, such as cleaning a filter or checking a door seal. It helps you see where the part sits in context.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.