Start from the symptom

Frigidaire washer not spinning.

On a top-load Frigidaire, the usual cause is an unbalanced load or a lid that isn’t closed. Frigidaire’s tub-not-spinning article says to power off, wait for the lid to unlock, rearrange the clothes and restart. After that it checks load size, shipping materials, level and hose connections.

Last reviewed

An open front-load washer with heavy wet clothes sagging in the drum, water dripping from the door seal, and a laundry basket on the floor.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Start with safe observations.

Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.

  1. 1

    Rebalance the load

    Turn the power off and wait for the lid to unlock before you reach in. Spread the clothes evenly. For a small load, add a few similar items. An oversized load can also stop the spin.

  2. 2

    Close the lid

    The manual says the washer won’t spin if the lid isn’t fully closed. E3 (lid open or lid lock failed) and CL (lid open with Child Lock on) are the matching codes.

  3. 3

    Look for shipping materials

    On a newly installed washer, check for foam under the unit and for shipping bolts. These are a classic cause of trouble.

  4. 4

    Check that it’s level

    Frigidaire lists an unlevel washer among its checks. E5 is the not-level code, and E4 is the out-of-balance code.

  5. 5

    Check the hoses

    Frigidaire asks whether the hot and cold hoses are reversed. The manual also lists a kinked drain hose and an overloaded washer as reasons a load comes out too wet after the spin.

  6. 6

    Water left after the cycle

    If water remains in the tub and the drain and spin never ran, the manual says that is a lid lock malfunction. Don’t bypass the lid lock.

If the display adds a code.

Keep the exact message.

We have not researched code meanings for this appliance yet. Use its manual and add a photo of the display to your request.

See the research status

When observation becomes a service request.

Leave internal testing to a technician.

Book a visit if the tub still won’t spin after rebalancing, leveling and checking the lid, if water is left in the tub once the cycle ends, or if Fd (door lock failed) or E7 (Hall sensor failed) appears. Those two have no owner steps in Frigidaire’s manual. Front-load models are different: AL 40 means the door isn’t shut.

Arrange a diagnostic

Sources and model boundaries.

These documents back up the Frigidaire washer not spinning advice. Use the manual that matches your model.

  • Laundry top loading washer tub not spinning (KB 1832094)
  • All about the Use & Care of your Washer, A29259301
  • Front Load Washer Use & Care Guide, A33032801

Follow the instructions written for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Why won’t my Frigidaire top-load washer spin?

Most often the load is out of balance or the lid isn’t closed. Turn the power off, wait for the lid to unlock, rearrange the clothes and restart. If it still won’t spin, book a visit.

What does E4 mean on a Frigidaire washer?

The unit is out of balance during spin. Rearrange the load and make sure the washer is level. If E4 continues, book a visit.

What does E3 mean?

The lid is open or the lid lock failed. Close the lid fully and restart. If E3 returns, the lid lock needs service, and you should not bypass it.

Is a front-load Frigidaire different?

Yes. Front-load washers show AL codes. AL 40 is a door that isn’t shut when Start is pressed, and the manual adds one or two similar items to a small load that spins out of balance.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.