Inside the appliance

Ice maker. In plain English.

The ice maker fills with water, freezes cubes and drops them into the bin. Frigidaire says a new unit needs 24 hours to settle before it makes ice, and that most problems come from the water supply, a locked display, a frozen auger or ice jammed between the maker and the bin.

Last reviewed

Freezer ice maker assembly with a tray of clear cubes above an empty white bin holding an auger.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Ice maker in the appliance

In Frigidaire’s manuals the ice maker sits above the ice container or bin. Your manual shows the layout for your model; the maker itself isn’t a part you open.

The photo shows the kind of part. It is not a guide to the right replacement for your model.

Owner care, within the model instructions.

Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.

  1. 1

    Give it time

    Frigidaire says a newly plugged-in unit needs 24 hours for temperature to stabilize before ice production, and after a power outage it needs the same again. A manual notes about 2 to 2.5 pounds of ice a day.

  2. 2

    Check supply and locks

    No water means no ice. Confirm water lines are connected, the filter is secure, and the display lock is off (hold the lock key 3 seconds). Doors must be fully closed to dispense.

  3. 3

    Look for a frozen auger or jam

    Melted and refrozen ice around the auger, or cubes wedged between the maker and the bin, stop dispensing. Frigidaire says to remove the bin, thaw and empty it, wipe it dry and put it back.

  4. 4

    Respect the 3-minute cutoff

    The dispenser shuts off after 3 minutes of continuous use to protect the motor. Release the paddle and try again.

Cleaning or replacement?

Leave internal testing to a technician.

Book a visit if there is still no ice after a day, or after the bin is cleared and the supply is confirmed. Don’t chip at the maker, and don’t force the auger; if it was turned, Frigidaire says to realign it in 45-degree steps.

Arrange a diagnostic

Sources and model boundaries.

These documents back up the Ice maker advice. Use the manual that matches your model.

  • Refrigerators - No Ice (KB 1898308)
  • Refrigerator Error Code DI SP or DISP - Ice Jam
  • My refrigerator was just installed and the ice maker is not working (KB 1853032)
  • Refrigerator Use & Care, A28067202
  • User Manual, Fridge Freezer, A28846701

Follow the instructions written for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Why is my new Frigidaire ice maker not making ice?

Frigidaire says a unit just plugged in needs 24 hours to stabilize, and new plumbing can cause 2 or 3 empty cycles. Check the water lines, the lock and the filter, and discard the first ice made.

What does DI SP mean?

Frigidaire says it means ice is jammed in the chute. Cubes may be stuck between the ice maker and bin, or ice may have melted and refrozen around the auger. Remove the bin, thaw and clear it.

Why does the dispenser stop after a while?

Frigidaire built in a shutoff after 3 minutes of continuous use to keep the motor from overheating. Let go of the paddle, then press again.

Is an ice maker on with no water hookup a problem?

It can be. One Frigidaire manual says an ice maker that is on with no water connected makes the water valve chatter loudly. Turn it off until it is hooked up.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.