What it means
HO, also shown as Hd, means the dishwasher is in Heat Delay or Heater On mode. It's the unit warming the water, and the sources list no steps. Colder incoming water means a longer delay.
Frigidaire dishwasher HO / Heat delay
HO, also shown as Hd, means the dishwasher is in Heat Delay or Heater On mode. It's the unit warming the water, and the sources list no steps. Colder incoming water means a longer delay.
Also shown as HO
HO, also shown as Hd, means the dishwasher is in Heat Delay or Heater On mode. It's the unit warming the water, and the sources list no steps. Colder incoming water means a longer delay.
Frigidaire's article treats the delay as normal while the water heats.
The sources give no call condition for HO.
Your checklist / kept on this device

Frigidaire's article treats the delay as normal while the water heats. Colder water takes longer; the article puts it at about 1 to 2 minutes for each degree of temperature rise.

The sources give no other action. If the dishwasher never moves on or you see other symptoms, your manual's contact guidance applies.
Tell us the model and what you have already checked, and start the request right here.
Book a visitSimplified schematic; real layouts differ by model. Tap an outlined part for its photo and the check that goes with it.

Component reference
The heating element warms the water and helps dry the load.
Read the definitionIt depends on how cold the incoming water is, since the unit has to heat it.
Read the supporting manualThe 2020 guide mentions it in its status section, and the newer manual has no row for it.
Read the supporting manualManufacturer document
Frigidaire / Electrolux
September 2020 / PDF p.9 (status section)
Manufacturer document
Frigidaire / Owner Center knowledge base
Owner Center article, cached 10.11.2026 (no edition date printed) / Article text
Manufacturer document
Frigidaire / Owner Center knowledge base
Owner Center article, cached 10.11.2026 (no edition date printed) / Article text
Manufacturer document
Frigidaire / Electrolux
No date printed / PDF p.10, section 4.5 Error Codes
HO is described in Frigidaire's article and the 2020 guide. The newer manual has no HO row, so check your own manual.
The article presents it as a mode, Heat Delay or Heater On, that the dishwasher enters while it warms the water.
Colder incoming water needs more time. Frigidaire's article gives about 1 to 2 minutes per degree of temperature rise.
Yes. The article covers both spellings and gives one meaning for them.
No reset is listed for HO. The article simply says the delay is part of heating the water.
Code / problem / part / repair
Most dishwasher sounds are part of a normal cycle. Frigidaire’s noise guide lists hissing from the water valve, humming from the wash and drain pumps, and a clunk when the detergent cup opens. A knock or bang usually means something is hitting a spray arm.
The heating element warms the water and helps dry the load. Frigidaire’s manual lists it among the dishwasher’s parts and warns that it stays hot, so let it cool before cleaning the tub. i60 means a problem with water heating, and HO or Hd means Heat Delay or Heater On mode, a heating step rather than a problem.
Book a diagnostic for your model, done at your home.
Office addresses and the entry details to have ready.