Start from the symptom
Frigidaire refrigerator ice maker not working.
Frigidaire’s order for an ice maker that makes no ice: how long the unit has been plugged in (24 hours to stabilize), a recent outage, the display lock, water to the unit, the filter, and ice or a frozen auger in the bin. On a new install, the ice maker needs the water system primed first, as air in the lines can cause 2 or 3 empty cycles.

Start with safe observations.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Is it on?
Check that the ice maker is on: the LED on the display is lit. Pressing and holding the On/Off button toggles it. Frigidaire ships it on, and says to set it to OFF if no water supply is connected.
- 2
New install
After install and several hours of cooling, ice can start within 24 hours. The bin fills from the rear, so you need to dispense some ice to move it forward and let the bin fill.
- 3
Unlock the display and check the water
The dispenser gives no water or ice with the display locked: hold the lock key for 3 seconds. The unit also needs water to make ice, so see whether it dispenses water.
- 4
Check the filter
The filter must be installed securely and not frozen or cracked. Frigidaire recommends changing it every 6 months, and priming and purging the unit after a new one.
- 5
Check the bin
Check for ice jammed between the ice maker and the bin, and for ice melted and frozen around the auger. Take out the bin, thaw and empty it, clean it, wipe it dry and replace it. Avoid turning the auger.
- 6
Doors and paddle
The unit won’t dispense with a door open, or after 3 minutes of continuous paddle use. Close the doors and release the paddle.
Systems a technician may investigate.
These parts are linked to the problem. What you noticed does not prove any one of them has failed.
If the display adds a code.
Keep the exact message.
We have not researched code meanings for this appliance yet. Use its manual and add a photo of the display to your request.
See the research statusRead the related care guide.

New fridge, no ice or water? Start here.
Air trapped in the new water line is the first thing Frigidaire names for uneven water or empty ice cycles on a just-installed unit. Prime and purge the line, give the ice maker up to 24 hours after the fridge has cooled, and check the water supply, the filter and the display lock.

Puddle under the fridge? Start here.
Frigidaire sorts refrigerator leaks by where the water is: outside the unit at the back connections and valve, inside the cabinet at the water filter, or at the dispenser chute and tip. A door left open can also ice up the evaporator and drip from the bottom.
When observation becomes a service request.
Leave internal testing to a technician.
Book a visit if power, lock, water, filter and bin all check out, the unit has been cold for 24 hours and there is still no ice. The A28067202 manual notes an ice maker should make about 2 to 2.5 pounds of ice in 24 hours on models that have one.
Arrange a diagnosticSources and model boundaries.
These documents back up the Frigidaire ice maker not working advice. Use the manual that matches your model.
- Refrigerators - No Ice (KB 1898308)
- My refrigerator was just installed and the ice maker is not working, how do I fix it? (KB 1853032)
- Refrigerator Prime and Purge Guide
- Refrigerator Use & Care Guide, A28067202
- Refrigerator Use & Care Guide, A23655704
Follow the instructions written for your own model. See how we research these pages.
Why isn’t my new Frigidaire refrigerator making ice?
Frigidaire says ice can take 24 hours after install and several hours of cooling, and the water system should be primed first. Air in new lines can cause 2 or 3 empty ice cycles.
How do I turn the Frigidaire ice maker on?
Press and hold the ice maker On/Off button on the control panel. The LED on the display lights when it’s on. Frigidaire ships it on.
Why does the ice maker make a loud noise with no water?
If no water supply is connected, Frigidaire says to set the ice maker to OFF, because the fill valve can chatter loudly when it tries to run without water.
Why is my ice maker making less ice?
Frigidaire’s checks are the filter, the freezer temperature, a frozen auger or a jam. The manual suggests a colder freezer setting and 24 hours to stabilize.
How long does the ice bin take to fill?
Ice fills the bin from the rear. Frigidaire says to dispense some ice so it moves forward and the bin can fill completely.
Code / problem / part / repair
From the code to what you do next.
Frigidaire refrigerator leaking water
Frigidaire sorts refrigerator leaks by where the water shows up: outside the unit (back connections and the water valve), inside (the water filter), or at the dispenser (frost in the chute, or air in the line). A door left open can also ice up the evaporator and leak from the bottom. Find the spot first, and book if the source isn’t one of these.
Ice maker
The ice maker fills with water, freezes cubes and drops them into the bin. Frigidaire says a new unit needs 24 hours to settle before it makes ice, and that most problems come from the water supply, a locked display, a frozen auger or ice jammed between the maker and the bin.
Refrigerator repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.
