Inside the appliance
Gas burner and ignitor. In plain English.
On a Frigidaire gas range each surface burner has a cap, a burner head and an electronic ignitor that sparks when you turn the knob to Lite. If a burner won’t light, Frigidaire starts with the knob, the caps, the ports and the power cord. The oven’s bake burner is a different part, and some gas ranges are under CPSC recall 26-333 for it.

Where it fits.
Gas burner and ignitor in the appliance
The ignitor sits under the burner head on the cooktop. The manual’s parts picture shows the cap, the head, the orifice holder and the ignitor stacked together.
The photo shows the kind of part. It is not a guide to the right replacement for your model.
What you notice when this part needs attention.
Trouble with the Gas burner and ignitor can show up as weaker performance or a code that keeps coming back. Only testing shows whether this part is the cause.

Frigidaire oven clock flashing or timer not working
A flashing 12:00 on a Frigidaire range means the control lost power and forgot the time. The manuals say the clock must be set before the oven will run, so set it first. Then check the 12/24-hour mode, the minute timer, a dash on the display and Delay Start. If the clock keeps resetting without a power cut, book a technician.

Frigidaire oven too hot, too cool or baking unevenly
Frigidaire’s own fix order starts with preheating, then rack position and bakeware, and only then calibration. Let the empty oven fully preheat with the door shut, then check pans and racks. On electric ovens the article also names low supply voltage and a worn door gasket. If it’s a gas range, read the recall note first.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Turn the knob fully to Lite
The gas range manual says to turn the knob all the way to Lite. When you do, all the ignitors spark together, but only the burner you set ignites.
- 2
Seat the head and cap
The burner head has a hole that fits over the ignitor, and the manual says it must sit snugly before the cap goes on. Frigidaire’s list asks for caps present and level.
- 3
Clear food from the ports
Frigidaire says food in the head’s slots and ports blocks gas flow and ignition. Its cleaning guide uses a soft brush, plus a toothpick or ignition port brush for the ignition port, with the burner off and cool.
- 4
Check the power cord
The ignitors are electronic, so Frigidaire’s list includes a loose or unplugged power cord. Plug it in firmly.
- 5
Smell gas? Stop
Don’t light anything or touch a switch or phone in the building. Leave and call your gas supplier from outside, as the manual says.
Cleaning or replacement?
Leave internal testing to a technician.
Book a visit if a burner still won’t light after these checks, or if it clicks and won’t catch. Don’t reach into the burner assembly yourself. For the oven, check recall 26-333 first.
Arrange a diagnosticSources and model boundaries.
These documents back up the Gas burner and ignitor advice. Use the manual that matches your model.
- What should I do if some or all of my burners are not lighting? (KB 1852985)
- Gas Cooktop Ignition Port Cleaning Guide
- User Manual, Gas Range, A30923903
- Electrolux Group Recalls Frigidaire Gas Ranges Due to Burn Hazard (CPSC recall 26-333)
Follow the instructions written for your own model. See how we research these pages.
Why won’t my gas burner light?
Frigidaire’s list: the knob is in Lite, the caps are in place and level, the ports are free of food, and the power cord is plugged in. Clean the head and slots only when the burner is off and cool.
Is my range part of the recall?
CPSC recall 26-333 (March 19, 2026) covers certain Frigidaire gas ranges for delayed ignition of the oven bake burner. Check the models and serial range at https://www.cpsc.gov/Recalls/2026/Electrolux-Group-Recalls-Frigidaire-Gas-Ranges-Due-to-Burn-Hazard
Do the recall and the surface burners go together?
No. The recall is about the oven bake burner. CPSC says the cooktop burners can keep being used, though a burner that won’t light is a separate problem.
Why do all my burners click at once?
The gas range manual says that when you set a knob to Lite, all the electronic ignitors spark at the same time, but only the burner you set will ignite. That is normal.
Code / problem / part / repair
From the code to what you do next.
Frigidaire cooktop flame uneven, orange or too high
An uneven flame usually means clogged ports or a cap that is not seated. An orange flame can come from dust in the gas line, which clears in a few minutes, or from a wrong L.P. conversion. A flame set too high points to the knob, the cap or the L.P. kit.
Cooktop repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.

