Inside the appliance
Dishwasher overfill protector. In plain English.
The overfill protector in a Frigidaire dishwasher keeps it from overfilling. It sits in the left front corner of the tub and should move up and down freely about one inch. If it sticks, Frigidaire says to lift it and clean underneath. The same part is on its checklist when the dishwasher will not fill.

Where it fits.
Dishwasher overfill protector in the appliance
In the left front corner of the tub.
The photo shows the kind of part. It is not a guide to the right replacement for your model.
What you notice when this part needs attention.
Trouble with the Dishwasher overfill protector can show up as weaker performance or a code that keeps coming back. Only testing shows whether this part is the cause.

Frigidaire dishwasher noises
Most dishwasher sounds are part of a normal cycle. Frigidaire’s noise guide lists hissing from the water valve, humming from the wash and drain pumps, and a clunk when the detergent cup opens. A knock or bang usually means something is hitting a spray arm.

Frigidaire dishwasher leaking
Stop the dishwasher and shut off its water supply before anything else. Frigidaire’s leak article starts with the drain hose, the door and the supply connections, then asks about filters, detergent and spilled rinse aid. An i30 code means the unit sensed water in its bottom pan.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Find it
Look in the left front corner of the tub for the overfill protector.
- 2
Lift and move it
It should move up and down freely about one inch. If it does not move, lift it and clean underneath.
- 3
Clean with vinegar or bleach cleaner
Frigidaire says to clean it occasionally with a household cleaner containing vinegar or bleach to dissolve any buildup. Do not mix the two.
- 4
Check the water supply
For a dishwasher that will not fill, the checklist starts with the water supply being turned on, then the overfill protector.
Cleaning or replacement?
Leave internal testing to a technician.
The overfill protector moves freely and the dishwasher still will not fill.
It is cracked or will not move after cleaning.
Water backs up in the tub.
Arrange a diagnosticSources and model boundaries.
These documents back up the Dishwasher overfill protector advice. Use the manual that matches your model.
- Dishwasher Use & Care, A23587501B
- User Manual, Dishwasher, 117825980A
Follow the instructions written for your own model. See how we research these pages.
What does the overfill protector do?
Frigidaire says it keeps the dishwasher from overfilling.
Where is it?
In the left front corner of the tub, according to Frigidaire's use and care guide.
How do I clean it?
Clean occasionally with a household cleaner containing vinegar or bleach to dissolve buildup. If it will not move, lift it and clean underneath.
Why does the dishwasher not fill?
Frigidaire lists the water supply first, then whether the overfill protector moves up and down freely.
Code / problem / part / repair
From the code to what you do next.
Frigidaire dishwasher noises
Most dishwasher sounds are part of a normal cycle. Frigidaire’s noise guide lists hissing from the water valve, humming from the wash and drain pumps, and a clunk when the detergent cup opens. A knock or bang usually means something is hitting a spray arm.
Dishwasher repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.

