Inside the appliance

Dishwasher bottom pan leak detection. In plain English.

For a leak in the dishwasher bottom pan, Frigidaire's code table lists E30 on E-code models and i30 on i-code models as a leak or overflow of water detected in the bottom pan. The two remedies printed are to look for loose connections at the water inlet valve and to make sure the dishwasher is properly leveled.

Last reviewed

Closed built-in dishwasher with the lower kick panel off, showing the dry floor beneath, a white base pan, a gray drain hose and two leveling feet.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Dishwasher bottom pan leak detection in the appliance

The bottom pan sits under the tub at the base of the dishwasher, per Frigidaire's code table wording. The manual does not show its exact position.

The photo shows the kind of part. It is not a guide to the right replacement for your model.

Owner care, within the model instructions.

Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.

  1. 1

    Stop the cycle

    Cancel the cycle and switch off power at the breaker before you reach near the base. This is our safety step.

  2. 2

    Look at the inlet valve connections

    Frigidaire says to look for loose connections at the water inlet valve. Check for drips and damp spots without loosening anything.

  3. 3

    Check the level

    The code table and the leaks page both say to check that the dishwasher is level.

  4. 4

    Check the door gasket

    The leaks page says the door gasket must be pressed into its channel, reach the bottom of the tub and not extend beyond the end rib.

  5. 5

    Wipe rinse aid spills

    Spilled rinse aid can cause foam that leads to overflowing. Wipe it up with a damp cloth and use the right amount of detergent.

Cleaning or replacement?

Leave internal testing to a technician.

E30 or i30 returns after the level and door gasket checks.

You see water under the dishwasher.

You cannot reach the inlet valve connections safely.

Arrange a diagnostic

Sources and model boundaries.

These documents back up the Dishwasher bottom pan leak detection advice. Use the manual that matches your model.

  • User Manual, Dishwasher, 117825980A
  • Dishwasher Use & Care, A117867311

Follow the instructions written for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What does E30 mean on a Frigidaire dishwasher?

Frigidaire's table says a leak or overflow of water is detected in the bottom pan. The i30 code has the same meaning.

What should I check first?

Look for loose connections at the water inlet valve and make sure the dishwasher is properly leveled.

Can too much soap trigger it?

Frigidaire says spilled rinse aid can cause foam that leads to overflowing, and asks you to avoid oversudsing with the right amount of detergent.

Is it safe to keep running the dishwasher?

Frigidaire lists no restart step. Water in the pan means a leak or overflow, so we suggest waiting until the source is found.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.