Start from the symptom

Frigidaire cooktop flame uneven, orange or too high.

An uneven flame usually means clogged ports or a cap that is not seated. An orange flame can come from dust in the gas line, which clears in a few minutes, or from a wrong L.P. conversion. A flame set too high points to the knob, the cap or the L.P. kit.

Last reviewed

Steel kettle on a gas burner whose flame is orange-yellow on the left side and blue on the right, with a crusty, dirty burner ring below
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Start with safe observations.

Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.

  1. 1

    Look at the flame shape

    Note whether the flame is uneven, only part way around the cap, orange, or too high. The manual's table separates them.

  2. 2

    Uneven: clean the ports

    Once the burner is off and cool, run a fine wire or needle through the ports. If moisture lingers afterward, fan the flame gently and leave the burner running until the flame fills out.

  3. 3

    Uneven or high: seat the cap

    Check that every burner cap sits level and correct on its head.

  4. 4

    Orange: let it run a few minutes

    Dust in the main gas line can turn the flame orange, and running the burner until it turns blue clears it. Near the coast, salt in the air can leave the flame slightly orange for good.

  5. 5

    Too high: check the knob

    The knob may simply be set to high. Turn it to a lower flame setting.

  6. 6

    Suspect the L.P. conversion

    An orange or high flame can also come from an incorrect L.P. conversion. The conversion kit instructions explain how to correct it.

More about this symptom.

What does an uneven flame mean?#

Blocked slots or ports, or a cap that is not seated properly. The manual says to clear the ports with a fine wire or needle when the burner is off and cool, then reseat the cap.

What does an orange flame mean?#

Dust in the main gas line is one cause and it clears within minutes. An incorrect L.P. conversion is the other. A slightly orange flame in coastal areas can be unavoidable.

When should I stop and call?#

If you smell gas, or the flame stays wrong after cleaning, seating and waiting. Leave gas adjustments to a technician.

If the display adds a code.

This topic has no code tied to it.

No other researched code is tied to this topic. Check the exact message in your model manual rather than borrowing another code from the library.

See the research status

When observation becomes a service request.

Leave internal testing to a technician.

The flame is still orange after several minutes on a natural gas range.

You converted the range to L.P. and the flames look wrong.

The flame is yellow-tipped and sooty.

You smell gas.

Arrange a diagnostic

Sources and model boundaries.

These documents back up the Frigidaire cooktop flame uneven, orange or too high advice. Use the manual that matches your model.

  • User Manual, Gas Range, A30923903
  • Gas Cooktop Ignition Port Cleaning Guide

Follow the instructions written for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Why is my Frigidaire gas flame orange?

The manual gives two reasons: dust particles in the main gas line, which clear once the burner has run a few minutes, or an incorrect L.P. conversion. Salt in coastal air can also leave a slightly orange flame.

Why does the flame only burn part way around the cap?

Clogged slots or ports, or a cap that is not seated properly. Clear the ports while the burner is off and cool, and check that the cap sits level on the head.

What if the flame is much too high?

Check the knob first, since it may be set to high. Then check the cap seating. If the range was converted to L.P., the manual points to the conversion kit instructions to correct the setup.

Is moisture after cleaning a problem?

No. If moisture is present after you clean the ports, fan the flame gently and run the burner until it is full. Let the burner dry rather than rushing the clean.

Do flame problems need a technician?

Often not. Cleaning and cap seating solve most of them. If an L.P. conversion is wrong or the flame stays wrong after cleaning, book a technician rather than adjusting gas parts yourself.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.