Start from the symptom
Frigidaire dishwasher won’t start.
Work down Frigidaire’s list: power, door latched, Delay Start, any code, water supply and drain hose. A CL or Cd code means the door isn’t latched, and the dishwasher won’t run until it is. If you opened the door mid-cycle, it needs Start pressed again.

Start with safe observations.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Power
The display should light. Check the cord and, after a power cut, the breaker box or fuse.
- 2
Door shut and latched
The unit won’t start until the door is fully closed and latched. CL or Cd on the display means it isn’t.
- 3
Delay Start or child lock
If Delay Start is on, the dishwasher waits for the set time. Hold Cancel until it resets. Also check you haven’t set the child lock.
- 4
Start/Cancel pressed
After choosing a cycle, press Start/Cancel. If you opened the door during a cycle, press Start/Cancel and shut the door right away. The manual says the cycle only resumes if you do this within 10 minutes.
- 5
Codes and flashing lights
Check for a code or flashing pattern. Frigidaire’s code guide covers CL/Cd and PF, and the flashing-lights article covers the rest.
- 6
Water and drain hose
The dishwasher won’t run without water, so confirm the supply is on. A drain hose installed wrongly or clogged can also stop it, according to Frigidaire.
Systems a technician may investigate.
These parts are linked to the problem. What you noticed does not prove any one of them has failed.
If the display adds a code.
Door
CL, also shown as Cd, means the dishwasher door hasn't been closed and latched. Close it fully and the code clears. If you can't get the door to close, contact service to check it.
Power
PF means the dishwasher lost power. Press START/CANCEL to clear the code and begin a new cycle. After a hard power failure, the 2020 guide says pressing Start within 18 hours can resume the cycle where it stopped.
Read the related care guide.

Strange noise from the dishwasher? Start here.
Most dishwasher sounds are part of a normal cycle. Frigidaire's noise guide lists hissing from the water valve, humming from the wash and drain pumps, clunks from the detergent cup and ball valve, and whooshing spray arms. A knock or bang usually means something is hitting a spray arm.

Spotty glasses and damp dishes? Check the rinse aid first.
Fill the rinse aid dispenser to the indicated level without overfilling, raise the L0 to L6 setting one step if you see spots and poor drying, and keep the detergent dose matched to your water hardness.
When observation becomes a service request.
Leave internal testing to a technician.
Book a visit if it has power, the door latches, there is no delay or lock, no code, and water is on, but it still won’t run. If it was installed in the last 30 days, Frigidaire says go back to the installer first.
Arrange a diagnosticSources and model boundaries.
These documents back up the Frigidaire dishwasher won’t start advice. Use the manual that matches your model.
- Dishwasher Not Starting (KB 1837717)
- What should I do if my dishwasher is not starting? (KB 1852996)
- Dishwasher Error Code CL or Cd - Door is open (KB 1830354)
- Dishwasher Use & Care, A23587501B
Follow the instructions written for your own model. See how we research these pages.
What does CL or Cd mean when my dishwasher won’t start?
The door is open or not latched. Push it fully shut until it latches. The kick plate can sometimes stop the door closing completely.
How do I cancel Delay Start?
Hold the Cancel button until the unit resets, per Frigidaire. Then pick your cycle and press Start/Cancel again.
Why did it stop after I opened the door mid-cycle?
The cycle pauses. Press Start/Cancel and close the door right away; the manual says to do this within 10 minutes for the dishwasher to carry on.
Does the dishwasher need water to start?
Yes. Frigidaire says it won’t run without water, so check the supply valve is open and the hose isn’t kinked.
Code / problem / part / repair
From the code to what you do next.
CL
CL, also shown as Cd, means the dishwasher door hasn't been closed and latched. Close it fully and the code clears. If you can't get the door to close, contact service to check it.
Frigidaire dishwasher noises
Most dishwasher sounds are part of a normal cycle. Frigidaire’s noise guide lists hissing from the water valve, humming from the wash and drain pumps, and a clunk when the detergent cup opens. A knock or bang usually means something is hitting a spray arm.
Water inlet valve
The water inlet valve opens to let supply water into the appliance, and shuts to stop it. Frigidaire’s guides name it for dishwasher codes i10 and i30, for refrigerator ice maker and dispenser water, and for washer filling. Hissing or buzzing as it opens is normal.
Dishwasher repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.
