Start from the symptom
Frigidaire washer leaking.
Find where the water comes from before you touch anything: inlet hose, drain hose, or the lid and underneath. Frigidaire’s order of checks is hoses and connections, the drain, then shipping bolts and level. Shut off the water first.

Start with safe observations.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Turn the water off and mop up
Close both supply faucets, wipe up the water and keep clear of the plug while the floor is wet.
- 2
Inlet hoses
Look for kinks or holes and check every connection. Disconnect one and look at the O-ring gasket: it should be present and undamaged. Cracks in the blue or red connector usually come from over-tightening and need service. To reconnect, tighten by hand, then a further half turn with a wrench.
- 3
Fill-hose threads
Check the connections at the faucet and the washer aren’t loose or cross-threaded, and that the rubber sealing washers are seated and in good shape.
- 4
Drain hose
Make sure it’s secured in the standpipe with a cable tie or bracket, not hanging loose. To test the house drain, pour a gallon of water down it. If it comes back up, call a plumber.
- 5
Lid and underneath
Check that all shipping materials, most often the shipping bolts, are removed and that the washer is level.
- 6
Suds that look like a leak
Non-HE detergent, or too much detergent in soft water, can overflow as suds. Use a high-efficiency detergent and less of it.
Systems a technician may investigate.
These parts are linked to the problem. What you noticed does not prove any one of them has failed.
If the display adds a code.
Keep the exact message.
We have not researched code meanings for this appliance yet. Use its manual and add a photo of the display to your request.
See the research statusRead the related care guide.

Smelly washer? A monthly Tub Clean and an open lid do most of the work.
Clean a Frigidaire top-load washer by running Tub Clean about once a month with one cup of liquid chlorine bleach or a washing machine cleaner pouch, then Rinse & Spin. Between times, empty it promptly and dry the lid area.

A code on your Frigidaire washer? Find your type first.
Frigidaire washer codes depend on the type. Top-load washers use E1 to E5, CL and a few F-codes. Current front-load washers use AL alarms such as AL 10 and AL 20. Older front-load E-codes like E11 or E23 are not in any current Frigidaire source.
When observation becomes a service request.
Leave internal testing to a technician.
Book a visit if a hose or connector is cracked, a drain hose is damaged or leaking, or the leak continues after you’ve checked the connections. On front-load models, AL F0 means the anti-flood device activated: close the water taps, unplug the washer and book. Installed in the last 30 days? Frigidaire says go back to the installer first.
Arrange a diagnosticSources and model boundaries.
These documents back up the Frigidaire washer leaking advice. Use the manual that matches your model.
- Laundry top load washer is leaking water (KB 1831569)
- What should I do if my washer is leaking? (KB 1853025)
- All about the Use & Care of your Washer, A29259301
- Front Load Washer Use & Care Guide, A33032801
Follow the instructions written for your own model. See how we research these pages.
Where do washer leaks usually come from?
Frigidaire’s order is the inlet hose and its connections, the drain hose and house drain, then the lid or underneath. Find the source first, then check that item.
How tight should the fill hose be?
Tighten by hand first, then a further half turn with a wrench, per Frigidaire. Cracked blue or red connectors are usually from over-tightening and need a visit.
Can suds cause a washer leak?
They can look like one. Frigidaire says non-HE detergent, or too much in soft water, makes suds that overflow onto the floor.
What does AL F0 mean?
On a front-load Frigidaire, the anti-flood device has activated. Close the water taps, unplug the washer, then book us.
Code / problem / part / repair
From the code to what you do next.
Frigidaire washer not spinning
On a top-load Frigidaire, the usual cause is an unbalanced load or a lid that isn’t closed. Frigidaire’s tub-not-spinning article says to power off, wait for the lid to unlock, rearrange the clothes and restart. After that it checks load size, shipping materials, level and hose connections.
Washer inlet and drain hoses
Frigidaire sorts a washer leak by where the water comes from. The inlet hoses and their connections come first, then the drain hose in the standpipe. Cracks in the blue or red connector usually come from over-tightening and need service.
Washer repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.
