What it means
F31 is listed by Frigidaire as “Shorted Probe” for its range ovens, and the sources add no cause beyond that name. Press OFF, reset the power, set the clock and try Bake or Broil again. If F31 comes back, arrange service.
Frigidaire oven F31 / Probe
F31 is listed by Frigidaire as “Shorted Probe” for its range ovens, and the sources add no cause beyond that name. Press OFF, reset the power, set the clock and try Bake or Broil again. If F31 comes back, arrange service.
Also shown as F31
F31 is listed by Frigidaire as “Shorted Probe” for its range ovens, and the sources add no cause beyond that name. Press OFF, reset the power, set the clock and try Bake or Broil again. If F31 comes back, arrange service.
If you smell gas, don't light anything, don't touch an electrical switch and don't use a phone inside; call your gas supplier from a neighbor's.
F31 returns after the power reset, the clock step and another try at Bake or Broil.
Your checklist / kept on this device

Press OFF to clear the code from the display, then start Bake or Broil. The range manuals give this as the first step for any F or E code.

Cut power to the range by unplugging it or by switching its breaker off and back on. Frigidaire's article says to leave it off for up to 30 seconds, while the electric and gas range manuals say to wait 5 minutes before restoring power. Follow the time in your own manual.

Once power is back, set the clock and try Bake or Broil. If the code shows up again, press OFF to clear it.

A code that repeats after the reset is the point to hand over. Frigidaire's article says to go back to your installer if the range is new, and otherwise to arrange service.
Tell us the model and what you have already checked, and start the request right here.
Book a visit
Simplified schematic; real layouts differ by model. Tap an outlined part for its photo and the check that goes with it.

Component reference
On electric ranges Frigidaire prints F30 as Open Probe and F31 as Shorted Probe.
Read the definitionPressing OFF clears the display. The manuals treat a code that repeats after the power reset as the cue to call for service, not to keep trying.
Read the supporting manualThe Owner Center article asks for up to 30 seconds without power, and the range manuals ask for 5 minutes. Both are Frigidaire documents, so the manual for your model has the final say.
Read the supporting manualManufacturer document
Frigidaire / Owner Center knowledge base
Owner Center article, cached 10.11.2026 (no edition date printed) / Article text
Manufacturer document
Frigidaire / Owner Center knowledge base
Owner Center article, cached 10.11.2026 (no edition date printed) / Article text
Manufacturer document
Frigidaire / Electrolux
Current edition (20 pages, no date printed) / PDF p.17 (Troubleshooting)
Manufacturer document
Frigidaire / Electrolux
Current edition (20 pages, no date printed) / PDF p.16 (Troubleshooting)
Manufacturer document
U.S. Consumer Product Safety Commission
Recall notice, March 19, 2026 / Recall notice
The F31 article is marked as applying to electric ranges. The gas and induction range manuals print only a general step for any F or E code and give no meaning for F31, so on those ranges the name is a pointer, not a confirmed diagnosis. Your own manual sets the reset time.
Frigidaire's range article names it “Shorted Probe” and says nothing more about the cause. No part is named, so the code alone doesn't tell you what needs replacing.
The Owner Center article says up to 30 seconds. The electric and gas range manuals say 5 minutes. Because they differ, use the time printed in the manual for your model.
The article is marked for electric ranges. Gas and induction manuals give only the general step for any F or E code, with no meaning for F31, so don't read more into it.
No. Frigidaire lists F31 as Shorted Probe and F30 as Open Probe. They are separate entries, so check which one your display shows.
Code / problem / part / repair
F30 is the entry Frigidaire lists as “Open Probe” for range ovens. The sources give no cause or part beyond the name. Reset the power, set the clock and retry Bake or Broil, then arrange service if F30 repeats.
A flashing 12:00 on a Frigidaire range means the control lost power and forgot the time. The manuals say the clock must be set before the oven will run, so set it first. Then check the 12/24-hour mode, the minute timer, a dash on the display and Delay Start. If the clock keeps resetting without a power cut, book a technician.
On electric ranges Frigidaire prints F30 as Open Probe and F31 as Shorted Probe. The sources add nothing beyond those names. The home step is the power reset in the pages: disconnect for up to 30 seconds, then try again.
Book a diagnostic for your model, done at your home.
Office addresses and the entry details to have ready.