Start from the symptom
Frigidaire oven or range not heating.
Before anything else on a gas range, check whether it is covered by the CPSC recall 26-333 for delayed bake burner ignition. If it isn’t, work through Frigidaire’s checks: clock set, the right function started, and for burners the caps, ports and power cord. An electric range that heats nowhere right after install may have a wiring or voltage issue.

Start with safe observations.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Confirm the clock and function
The manuals list two common reasons the oven side does nothing: the time of day isn’t set, and the function wasn’t set properly. Set the clock, press the function key and START. The convection fan turns off if the door is open, and on gas models it starts about 6 minutes into preheat.
- 2
Read any F or E code
Press OFF to clear it, then try Bake or Broil. If it repeats, cut power for 5 minutes (the manual’s time; Frigidaire’s article says up to 30 seconds), restore it, set the clock and try again. A code that keeps returning is a reason to book.
- 3
Gas burners that won’t light
Frigidaire’s list: the knob is set to Lite, the burner caps are all in place and level, the burner ports are free of food, and the power cord is plugged in. Clean the head and slots only when the burner is off and cool, as your manual describes.
- 4
Coil burners on an electric range
Press the safety switch in the center of the coil: it should spring back. If it does, check the coil for damage, reseat it and try again, or swap it with another burner to see whether the coil or the receptacle is the problem.
- 5
Glass cooktops and new installs
Unplug the range for 30 seconds, then plug it in. If no burner heats and the range was just installed, Frigidaire points to a voltage or wiring issue. Cookware should have a flat bottom and be medium to heavy for even heat.
- 6
If you smell gas
Don’t light anything or touch a switch or phone in the building. Leave, then call your gas supplier from outside or a neighbor’s phone, as the gas range manual instructs. Don’t hunt for the leak yourself.
Systems a technician may investigate.
These parts are linked to the problem. What you noticed does not prove any one of them has failed.
If the display adds a code.
Probe
F30 is the entry Frigidaire lists as “Open Probe” for range ovens. The sources give no cause or part beyond the name. Reset the power, set the clock and retry Bake or Broil, then arrange service if F30 repeats.
Probe
F31 is listed by Frigidaire as “Shorted Probe” for its range ovens, and the sources add no cause beyond that name. Press OFF, reset the power, set the clock and try Bake or Broil again. If F31 comes back, arrange service.
Read the related care guide.

Oven clock stuck on 12:00? Start here.
A flashing 12:00 on a Frigidaire range or wall oven means the control lost power and forgot the time. Set the clock again before you cook, because the manuals say the oven needs the time of day. If it keeps resetting with no outage, book a technician.

Cookies burning on one side? Start here.
Frigidaire says bakeware and rack position change baking results more than most owners expect, and that air has to circulate around every pan. Check the rack, the pan material, the spacing and the preheat tone first. A technician is for an oven that still misbehaves after that.
When observation becomes a service request.
Leave internal testing to a technician.
Book a technician if the oven stays cold after the steps above, burners still won’t light, or a code returns. Gas range? The CPSC recall 26-333 (March 19, 2026) covers delayed ignition of the bake burner on certain Frigidaire gas ranges. Check your model and serial number against the notice, and if your range is listed, stop using the oven and tell us when you book.
Arrange a diagnosticSources and model boundaries.
These documents back up the Frigidaire oven or range not heating advice. Use the manual that matches your model.
- Ranges - No Heating (KB 1819544)
- What should I do if some or all of my burners are not lighting? (KB 1852985)
- User Manual, Gas Range, A30923903
- User Manual, Electric Range, A30923902
- Electrolux Group Recalls Frigidaire Gas Ranges Due to Burn Hazard (CPSC recall 26-333)
Follow the instructions written for your own model. See how we research these pages.
Is my Frigidaire gas range part of the recall?
Check the CPSC notice for recall 26-333 (March 19, 2026). It lists the model numbers and a serial range printed on the nameplate in the drawer beneath the oven. If yours matches, stop using the oven.
What is the recall problem?
CPSC says the oven’s bake burner can ignite late. The notice reports 62 incidents, including 30 burn injuries, and says cooktop burners can still be used.
Why won’t my gas burners light?
Frigidaire’s list: knob in the Lite position, caps seated and level, clean burner ports, and the power cord plugged in. Check your manual for how to clean the head and slots.
Why does my new electric range have no heat?
Frigidaire says a recently installed range where no burner heats may have a voltage or wiring issue. A 30-second power reset is the only step it gives first; after that, book a technician.
Why does the oven fan run but nothing heats?
The fan runs during preheat and can stay on after you turn the oven off, which Frigidaire calls normal. If the oven never reaches temperature, book a visit and mention which function you set.
Code / problem / part / repair
From the code to what you do next.
F30
F30 is the entry Frigidaire lists as “Open Probe” for range ovens. The sources give no cause or part beyond the name. Reset the power, set the clock and retry Bake or Broil, then arrange service if F30 repeats.
Frigidaire oven clock flashing or timer not working
A flashing 12:00 on a Frigidaire range means the control lost power and forgot the time. The manuals say the clock must be set before the oven will run, so set it first. Then check the 12/24-hour mode, the minute timer, a dash on the display and Delay Start. If the clock keeps resetting without a power cut, book a technician.
Gas burner and ignitor
On a Frigidaire gas range each surface burner has a cap, a burner head and an electronic ignitor that sparks when you turn the knob to Lite. If a burner won’t light, Frigidaire starts with the knob, the caps, the ports and the power cord. The oven’s bake burner is a different part, and some gas ranges are under CPSC recall 26-333 for it.
Oven repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.
