Inside the appliance
Freezer door gasket. In plain English.
The gasket is the soft strip that seals the freezer door. Frigidaire says a leaky seal makes the temperature unstable and lists a warped gasket or door among the causes of frost. Test the seal with a dollar bill and wash the gasket in warm soapy water.

Where it fits.
Freezer door gasket in the appliance
Along the edge of the freezer door or lid, where it closes on the cabinet.
The photo shows the kind of part. It is not a guide to the right replacement for your model.
What you notice when this part needs attention.
Trouble with the Freezer door gasket can show up as weaker performance or a code that keeps coming back. Only testing shows whether this part is the cause.

Frigidaire freezer not freezing or too warm
Frigidaire's article runs through install and power first, then the setting, a recent outage, the location, the door seal, frost and overloading. The suggested freezer setting is 0 F. If the unit has run for 24 hours and is still not cold, schedule service.

Frigidaire freezer odor
Frigidaire links freezer odors first to how food is stored: strong-smelling foods that are not covered tightly, or containers and wraps (paper, foil, plastic) that carry a smell. After that, clean the interior with a sponge, warm water and baking soda.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Close the door on a bill
Open the door, close it on a dollar bill and tug. You should feel some resistance.
- 2
Read the result
A bill that slides out freely, or drops, means the seal is weaker than it should be.
- 3
Wash the gasket
Clean the door gasket with warm soapy water.
- 4
Check the door itself
Check that nothing holds the door ajar and that it closes fully.
Cleaning or replacement?
Leave internal testing to a technician.
The bill slides out at several spots after the gasket is clean.
The gasket looks torn or warped.
Frost keeps returning around the door.
Arrange a diagnosticSources and model boundaries.
These documents back up the Freezer door gasket advice. Use the manual that matches your model.
- Freezer - Not Freezing or Not Cooling (KB 1907715)
- Refrigerators / Freezer - Frost Build Up (KB 1918348)
Follow the instructions written for your own model. See how we research these pages.
How do I test the freezer seal?
Close the door on a dollar bill and tug. The bill should resist. If it slides out or drops, the seal is weak.
Can a bad gasket cause frost?
Frigidaire names a warped gasket or door, which stops a proper seal, as a cause of frost.
How do I clean it?
Use warm soapy water.
What else causes warm temperatures?
Frigidaire also lists a door left open, overloaded shelves and blocked vents.
Code / problem / part / repair
From the code to what you do next.
Frigidaire freezer not freezing or too warm
Frigidaire's article runs through install and power first, then the setting, a recent outage, the location, the door seal, frost and overloading. The suggested freezer setting is 0 F. If the unit has run for 24 hours and is still not cold, schedule service.
Freezer repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.

