Inside the appliance

Refrigerator water filter. In plain English.

The water filter cleans the water that goes to your dispenser and ice maker. Frigidaire says to change it about every six months, and after a new one goes in you need to prime and purge the system. A filter that is loose, cracked or frozen can mean slow or no water, or a leak inside the cabinet.

Last reviewed

White cylindrical refrigerator water filter cartridge with a twist-lock cap beside a glass of water on a bench.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Refrigerator water filter in the appliance

Its position varies by model. Your use and care manual shows the spot for your unit, and the filter type is printed on the old cartridge.

The photo shows the kind of part. It is not a guide to the right replacement for your model.

Owner care, within the model instructions.

Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.

  1. 1

    Check the change date

    Frigidaire’s article says to replace the filter every six months. On most models a Water Filter Status light on the display comes on to remind you.

  2. 2

    Look at the fit

    Frigidaire asks you to confirm the filter is installed securely, and not frozen or cracked. Cracks can cause leaking in the cabinet and slow or no water at the door.

  3. 3

    Prime and purge after a change

    Run water through the dispenser until it flows, about 1 to 2 minutes, then discard 3 to 5 tall glasses for a new filter. Trapped air can also cause 2 or 3 empty ice maker cycles.

  4. 4

    Match the filter type

    Frigidaire says to order the same filter type that is in your refrigerator. Fridges that sat unused, like after a move, should get a new filter before you reinstall.

Cleaning or replacement?

Leave internal testing to a technician.

Book a visit if the dispenser is still slow or dry after a new filter has been primed, or if water is leaking inside the cabinet. Turn off the supply line first if water is pooling.

Arrange a diagnostic

Sources and model boundaries.

These documents back up the Refrigerator water filter advice. Use the manual that matches your model.

  • Refrigerators - How often should I change my water filter? (KB 1847717)
  • Refrigerators - No Water (KB 1900025)
  • Refrigerator Prime and Purge Guide
  • Refrigerator Water Leaks (KB 1847166)
  • User Manual, Fridge Freezer, A28846701

Follow the instructions written for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
How often should I change a Frigidaire water filter?

Frigidaire says about every six months, for clean and safe drinking water and ice. Most models also light a Water Filter Status indicator on the display when it is time.

Do I need to prime a new filter?

Yes. Frigidaire says to prime and purge after installing a new filter. Hold a pitcher to the paddle until water flows, then discard 3 to 5 tall glasses of water.

Can a bad filter stop my water or ice?

Yes. Frigidaire lists a filter that is loose, frozen or cracked among the checks for no water and no ice, and says a cracked one can leak inside the cabinet.

Why is my ice funny-tasting after a filter change?

Frigidaire says air in new plumbing lines can make ice discolored or odd-tasting and cause empty ice maker cycles. Priming and purging clears this, and the first ice made should be discarded.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.