Inside the appliance
Gas cooktop burner head and cap. In plain English.
Each gas burner has a head with ports and slots that shape the flame, and a cap on top. Frigidaire blames uneven flames on clogged ports or a cap that has not seated, and asks you to clean only a cold, switched-off burner using a soft brush plus a toothpick or fine wire.

Where it fits.
Gas cooktop burner head and cap in the appliance
On top of each gas burner on the cooktop, under the grate.
The photo shows the kind of part. It is not a guide to the right replacement for your model.
What you notice when this part needs attention.
Trouble with the Gas cooktop burner head and cap can show up as weaker performance or a code that keeps coming back. Only testing shows whether this part is the cause.

Frigidaire cooktop flame uneven, orange or too high
An uneven flame usually means clogged ports or a cap that is not seated. An orange flame can come from dust in the gas line, which clears in a few minutes, or from a wrong L.P. conversion. A flame set too high points to the knob, the cap or the L.P. kit.

Frigidaire gas cooktop burner will not ignite
Start at the knob: it must be pressed in and rotated all the way to Lite before the burner catches. Next confirm that the ports are open, the cap sits level, and, where the range has electric ignition, the cord is seated. Only clean ports when the burner is off and cool.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Let it cool
Once the burner is off and cold, lift away the cap and head.
- 2
Clear the ports
Use a soft bristle brush on the slots and holes, and a toothpick, paperclip or ignition port brush for any blockage.
- 3
Dry it
If damp remains after cleaning, the manual says to fan the flame lightly and let the burner run.
- 4
Reseat the cap
Check that the head fits snugly, then set the cap on level and seated before you cook.
Cleaning or replacement?
Leave internal testing to a technician.
The flame stays uneven despite clear ports and a seated cap.
It clicks but still will not light after you cleaned it.
You smell gas.
Arrange a diagnosticSources and model boundaries.
These documents back up the Gas cooktop burner head and cap advice. Use the manual that matches your model.
- Gas Cooktop Ignition Port Cleaning Guide
- User Manual, Gas Range, A30923903
Follow the instructions written for your own model. See how we research these pages.
Why is my flame uneven?
The manual lists clogged slots or ports and caps not seated properly.
What can I clean the ports with?
A soft bristle brush, then a toothpick, paperclip or ignition port cleaning brush for blockages.
Can I use steel wool?
No. The guide keeps abrasives, oven cleaner and steel wool away from the burner head.
Do I need the cap on?
Yes. Keep the caps and heads in place, and never run the burners without them.
Code / problem / part / repair
From the code to what you do next.
Frigidaire cooktop flame uneven, orange or too high
An uneven flame usually means clogged ports or a cap that is not seated. An orange flame can come from dust in the gas line, which clears in a few minutes, or from a wrong L.P. conversion. A flame set too high points to the knob, the cap or the L.P. kit.
Cooktop repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.

