Inside the appliance
Dishwasher filter and glass trap. In plain English.
The filter system at the bottom of the dishwasher tub catches food soil so it doesn’t clog the drain. Frigidaire’s guide covers a coarse filter and a cylinder fine filter, which also catches glass, bones and pits. A clogged one is behind i20 and i40, poor cleaning and slow draining.

Where it fits.
Dishwasher filter and glass trap in the appliance
Frigidaire’s guide puts the coarse filter on the tub floor, with the cylinder fine filter that you take out first.
The photo shows the kind of part. It is not a guide to the right replacement for your model.
What you notice when this part needs attention.
Trouble with the Dishwasher filter and glass trap can show up as weaker performance or a code that keeps coming back. Only testing shows whether this part is the cause.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Pull out the cylinder filter
Turn the cylinder fine filter counterclockwise, lift it out, empty it and rinse it under running water. A sponge or bottle brush clears stubborn residue.
- 2
Flush the coarse filter
With the fine filter out, lift the coarse filter from the tub bottom, hold it under running water and put it back.
- 3
Check the sump area
For i40, Frigidaire says food soils have built up in the sump, so clean the glass trap and rerun the unit. i20 adds the drain hose and the disposer knockout plug.
- 4
Look at the air gap
If the dishwasher has a drain air gap on the countertop, Frigidaire says to check it is clean. The air gap is not part of the dishwasher and isn’t covered by warranty.
Cleaning or replacement?
Leave internal testing to a technician.
Book a visit if i20 or i40 stays after the filters are clean and the hose is clear, or if water keeps standing in the tub. Don’t run it with the filters out.
Arrange a diagnosticSources and model boundaries.
These documents back up the Dishwasher filter and glass trap advice. Use the manual that matches your model.
- Dishwasher Glass Trap and Filter Guide (KB 1829617)
- Dishwasher Error Code i40 - Clogged filter or sump (KB 1831281)
- Dishwasher Error Code i20 - Unit did not drain properly (KB 1830367)
- Dishwashers - Not Draining
- Dishwasher Use & Care, A23587501B
Follow the instructions written for your own model. See how we research these pages.
How do I clean the glass trap?
Frigidaire says to rotate the cylinder fine filter counterclockwise, lift it out, empty it and hold it under the tap. Then lift out the coarse filter, flush it and put both back.
What does i40 mean?
Frigidaire says i40 is a clogged filter or sump from built-up food soils. Clean out the glass trap and filter, rerun the unit, and inspect the drain hose. If the code persists, book a technician.
How often should the filter be emptied?
The Frigidaire pages cached for this site give no schedule. They do say the cylinder fine filter needs cleaning to keep wash performance up, and to clean it when draining slows.
Does the filter catch broken glass?
Frigidaire says the cylinder fine filter is built to collect larger items such as broken glass, bones and fruit pits. Take care emptying it, and rinse it carefully.
Code / problem / part / repair
From the code to what you do next.
i20
i20 means clogged filters or a restricted drain line were detected, and Frigidaire's article adds that the unit didn't drain completely. Clean both filters and the sump, check the drain hose, then reset the dishwasher.
Frigidaire dishwasher noises
Most dishwasher sounds are part of a normal cycle. Frigidaire’s noise guide lists hissing from the water valve, humming from the wash and drain pumps, and a clunk when the detergent cup opens. A knock or bang usually means something is hitting a spray arm.
Dishwasher drain pump
The drain pump moves used water out of the dishwasher. Frigidaire’s noise guide describes its hum as steady at first, then changing as the last water goes out. For i20 Frigidaire checks the hose, the disposer plug and the filters; i50 covers a problem with the drain or wash motor.
Dishwasher repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.

