What it means
F1 is listed by Frigidaire as “Shorted Key Pad” for range ovens, with no explanation past the name. Press OFF, reset the power, set the clock and retry Bake or Broil. If F1 returns, arrange service.
Frigidaire oven F1 / Control panel
F1 is listed by Frigidaire as “Shorted Key Pad” for range ovens, with no explanation past the name. Press OFF, reset the power, set the clock and retry Bake or Broil. If F1 returns, arrange service.
Also shown as F1
F1 is listed by Frigidaire as “Shorted Key Pad” for range ovens, with no explanation past the name. Press OFF, reset the power, set the clock and retry Bake or Broil. If F1 returns, arrange service.
If you smell gas, don't light anything, don't touch an electrical switch and don't use a phone inside; call your gas supplier from a neighbor's.
F1 returns after the power reset, the clock step and another try at Bake or Broil.
Your checklist / kept on this device

Press OFF to clear F1 from the display, then try Bake or Broil. Both range manuals list this as the first move for an F or E code.

Unplug the range or switch its breaker off and on. The article says up to 30 seconds without power; the manuals say to wait 5 minutes. Use the time in your model's manual.

After power returns, set the clock, then run Bake or Broil. If F1 reappears, press OFF to clear it.

Don't keep cycling the power. The article sends a recently installed range back to its installer and tells everyone else to arrange service.
Tell us the model and what you have already checked, and start the request right here.
Book a visit
Simplified schematic; real layouts differ by model. Tap an outlined part for its photo and the check that goes with it.

Component reference
The keypad is the set of keys or touch pads that tells the control what to do.
Read the definitionThe sources only list the name “Shorted Key Pad” and a reset. They give no instruction about the keypad itself.
Read the supporting manualBoth range manuals say to clear the code with OFF after the reset steps and to call for service if the problem recurs.
Read the supporting manualManufacturer document
Frigidaire / Owner Center knowledge base
Owner Center article, cached 10.11.2026 (no edition date printed) / Article text
Manufacturer document
Frigidaire / Owner Center knowledge base
Owner Center article, cached 10.11.2026 (no edition date printed) / Article text
Manufacturer document
Frigidaire / Electrolux
Current edition (20 pages, no date printed) / PDF p.17 (Troubleshooting)
Manufacturer document
Frigidaire / Electrolux
Current edition (20 pages, no date printed) / PDF p.16 (Troubleshooting)
Manufacturer document
U.S. Consumer Product Safety Commission
Recall notice, March 19, 2026 / Recall notice
The F1 article is marked as applying to electric ranges. The gas and induction manuals show only the general step for an F or E code and no meaning for F1. Reset time differs between the Owner Center article and the manuals, so go by your own manual.
The Owner Center article names it “Shorted Key Pad”. It doesn't describe the cause or name a part, so the name is all the sources support.
The sources don't say so. Frigidaire lists F1 by name, while F0, F5 and F6 have no range entry in the documents checked.
The sources don't address that. They give a reset and say to arrange service if the code repeats, so follow your manual for what to do in the meantime.
The gas range manual prints the same general F or E step: press OFF, power off for 5 minutes, set the clock and try Bake or Broil. It gives no meaning for F1.
Code / problem / part / repair
A flashing 12:00 on a Frigidaire range means the control lost power and forgot the time. The manuals say the clock must be set before the oven will run, so set it first. Then check the 12/24-hour mode, the minute timer, a dash on the display and Delay Start. If the clock keeps resetting without a power cut, book a technician.
The keypad is the set of keys or touch pads that tells the control what to do. Frigidaire lists F1 as “Shorted Key Pad” on range ovens, and its dishwasher guide says a shorted keypad drains the unit and flashes its lights. Both guides begin with a power reset.
Book a diagnostic for your model, done at your home.
Office addresses and the entry details to have ready.