Inside the appliance

Dishwasher spray arms. In plain English.

The spray arms turn and spray water over the load. Frigidaire’s noise guide ties three sounds to them: whooshing as water switches between the lower and upper arms, a clunk from the ball valve when they alternate, and clunking when a tall item hits an arm.

Last reviewed

Open dishwasher with a lower spray arm beneath a rack holding plates, glasses, utensils and a tall baking pan standing upright.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Dishwasher spray arms in the appliance

Inside the tub, below and above the racks. The manual refers to a lower and a middle spray arm.

The photo shows the kind of part. It is not a guide to the right replacement for your model.

Owner care, within the model instructions.

Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.

  1. 1

    Find the sound

    A changing whoosh is the water moving between the bottom and top arms. A single clunk when the arms alternate is the ball valve. Frigidaire lists both as normal.

  2. 2

    Look for a blocked arm

    Frigidaire says to check that no dish, pot, pan or utensil is making the spray arm circulate improperly. A knocking or banging sound points there.

  3. 3

    Check the racks

    The manual says nothing should protrude through the bottom of the rack and block the middle spray arm. Unlatch the door and wait a few seconds until the wash action stops before opening it.

  4. 4

    Expect a pause

    The manual says each spray arm has its own sound and the dishwasher may pause with no sound while the wash switches between the lower and middle arms.

Cleaning or replacement?

Leave internal testing to a technician.

Book a visit if knocking or grinding continues with the racks loaded clear of both arms, or the arms no longer turn freely by hand when the dishwasher is stopped and cool.

Arrange a diagnostic

Sources and model boundaries.

These documents back up the Dishwasher spray arms advice. Use the manual that matches your model.

  • Dishwasher - Noise Guide (KB 1928400)
  • Dishwashers - What are normal dishwasher operations sounds? (KB 1847433)
  • Dishwasher Use & Care, A23587501B

Follow the instructions written for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Why does it clunk when the arms change?

Frigidaire’s noise guide says a clunk from the ball valve can happen when the spray arms alternate.

What causes knocking or banging?

Frigidaire names a dish, pot, pan or utensil stopping a spray arm. An item that is too tall is a common cause.

Is the change in sound normal?

Yes. The manual says there is a noticeable change when the wash action switches between the lower and middle spray arm.

What should I check first for dishwasher spray arms?

A changing whoosh is the water moving between the bottom and top arms. A single clunk when the arms alternate is the ball valve. Frigidaire lists both as normal.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.