Inside the appliance
Washer lid lock. In plain English.
On a Frigidaire top-load washer, the safety lid lock keeps the lid shut during the final spin. Code E3 means the lid is open or the lid lock failed. Frigidaire says the lid can’t be opened during the Spin cycle and may take 1 to 3 minutes to release after you stop the washer.

Where it fits.
Washer lid lock in the appliance
The manual’s diagram labels it where the lid closes on the top-load washer. It isn’t a part to touch or adjust.
The photo shows the kind of part. It is not a guide to the right replacement for your model.
What you notice when this part needs attention.
Trouble with the Washer lid lock can show up as weaker performance or a code that keeps coming back. Only testing shows whether this part is the cause.

Frigidaire washer not spinning
On a top-load Frigidaire, the usual cause is an unbalanced load or a lid that isn’t closed. Frigidaire’s tub-not-spinning article says to power off, wait for the lid to unlock, rearrange the clothes and restart. After that it checks load size, shipping materials, level and hose connections.

Frigidaire washer not draining
On a top-load Frigidaire, check the drain hose and standpipe first, then detergent. E2 means the unit took over 10 minutes to drain. Frigidaire’s article asks if the washer has been moved, if the hose is kinked, and if the standpipe is the right height.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Close the lid fully
Frigidaire’s E3 article starts with making sure the lid is completely closed. The washer won’t operate or fill with the lid open, which also explains many won’t-start cases.
- 2
Wait for the lock to release
Press Pause or stop the washer and wait 1 to 3 minutes. Don’t force a locked lid.
- 3
Check the level
Frigidaire’s E3 article also asks you to confirm the washer is level.
- 4
Look at Child Lock
The manual says Child Lock can trigger CL if the lid is open more than 20 seconds. Turn Child Lock off by following the manual.
Cleaning or replacement?
Leave internal testing to a technician.
Book a visit if E3 keeps appearing, the lid doesn’t lock after starting, or the washer leaves water in the tub or skips drain and spin. The manual says never to bypass the lid lock. Don’t tape or prop it shut.
Arrange a diagnosticSources and model boundaries.
These documents back up the Washer lid lock advice. Use the manual that matches your model.
- Laundry top loading washer displaying Error Code E3 washer lid open or lid lock failed (KB 1829706)
- Top Load Washer - What should I do if my Frigidaire Top Load washer lid will not open? (KB 1848677)
- All about the Use & Care of your Washer, A29259301
- Laundry Washers Noises Guide (KB 1820062)
Follow the instructions written for your own model. See how we research these pages.
What does E3 mean on a Frigidaire top-load washer?
Frigidaire says E3 means the lid is open or the lid lock failed. Close the lid completely and check the washer is level. If the lid doesn’t lock after starting, the lock or the circuit board may have failed.
Why won’t my washer lid open?
For safety, Frigidaire says the lid can’t be opened during Spin. Stop the washer and wait 1 to 3 minutes for the safety lock to release. Don’t force the lid.
Is the clicking from the lid normal?
Yes. Frigidaire’s noise guide says a double clicking sound is normal when the lid lock engages or disengages.
Can I bypass the lid lock to finish a load?
No. Frigidaire’s manual says never to bypass it and not to run the washer if the safety lid lock is missing, damaged or working improperly. Book a technician instead.
Code / problem / part / repair
From the code to what you do next.
Frigidaire washer not spinning
On a top-load Frigidaire, the usual cause is an unbalanced load or a lid that isn’t closed. Frigidaire’s tub-not-spinning article says to power off, wait for the lid to unlock, rearrange the clothes and restart. After that it checks load size, shipping materials, level and hose connections.
Washer repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.

