Inside the appliance

Refrigerator door gasket. In plain English.

The door gasket is the flexible seal around the refrigerator and freezer doors. Frigidaire links a dirty, warped or non-sealing gasket to unstable temperatures, frost and doors that won’t close. You can clean it with warm soapy water and test the seal with a dollar bill.

Last reviewed

Cut section of gray refrigerator door gasket showing its magnetic strip and folded sealing bellows on a bench.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Refrigerator door gasket in the appliance

It is the soft seal around the edge of each door, on the side that meets the cabinet. You can see and feel it when the door is open.

The photo shows the kind of part. It is not a guide to the right replacement for your model.

Owner care, within the model instructions.

Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.

  1. 1

    Clean it

    Frigidaire says a dirty gasket can keep a door from closing properly. Wipe it with a soft cloth and warm soapy water, and avoid abrasive or petroleum-based cleaners on gaskets.

  2. 2

    Try the dollar-bill test

    Close the door on a dollar bill and give it a tug. You should feel some resistance. If it slides out freely or drops, the seal isn’t as strong as it should be.

  3. 3

    Look for a warp

    Frigidaire names a warp in the gasket or the door as a cause of frost. Check the gasket sits flat and that nothing blocks the door from shutting.

  4. 4

    Watch the temperature

    A door that doesn’t seal gives an unstable temperature, per Frigidaire. Recheck the readings after you clean the gasket or clear the door.

Cleaning or replacement?

Leave internal testing to a technician.

Book a visit if the gasket is torn, warped or won’t seal even when clean, or if frost and warm food keep returning after the door checks. Don’t glue or tape it.

Arrange a diagnostic

Sources and model boundaries.

These documents back up the Refrigerator door gasket advice. Use the manual that matches your model.

  • Refrigerators - Not Cooling (KB 1898299)
  • Refrigerators / Freezer - Frost Build Up (KB 1918348)
  • Refrigerator Door Issues
  • Refrigerator Use & Care, A28067202

Follow the instructions written for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
How do I test a refrigerator door seal?

Frigidaire suggests closing the door on a dollar bill and tugging it. A bit of resistance is right. If the bill slides out with no resistance or falls to the floor, the seal is weak.

Can a bad gasket cause frost?

Yes. Frigidaire lists a warped door gasket or door that keeps a proper seal from forming as a cause of frost, alongside a chute flap that doesn’t close and blocked vents.

What should I clean a gasket with?

Frigidaire says warm soapy water and a clean soft cloth. Its manual warns against abrasive cleaners, scouring pads, bleach and petroleum-based products on gaskets.

Why won’t my refrigerator door close all the way?

Frigidaire says to clear anything blocking it and clean the gaskets, since a dirty gasket can keep the door from closing properly. Check for a warp too.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.