Start from the symptom
Frigidaire dishwasher controls not responding.
The usual reason is the child lock, which Frigidaire built to stop settings being changed. Delay Start turns it on and off, and the method depends on your tub. If the keypad is shorted, a 5-minute power-off may clear it.

Start with safe observations.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Plastic tub: hold Delay Start
Press and hold Delay Start for 3 seconds. The lock indicator lights when the controls are locked. Hold Delay Start for 3 seconds again to unlock; the light goes out.
- 2
Stainless steel tub: look for loc
Press Delay Start until the display shows loc. To unlock, press Delay Start until loc is gone from the display.
- 3
Check for flashing lights
If the status lights flash and the dishwasher drains, Frigidaire describes a shorted keypad. Turn the power off for 5 minutes at the breaker.
- 4
Look at the display for a code
iC0 is a separate message about the electronic control system. Its only owner step is a reset: Cancel, or breaker off for 5 minutes.
Systems a technician may investigate.
These parts are linked to the problem. What you noticed does not prove any one of them has failed.
Read the related care guide.

Strange noise from the dishwasher? Start here.
Most dishwasher sounds are part of a normal cycle. Frigidaire's noise guide lists hissing from the water valve, humming from the wash and drain pumps, clunks from the detergent cup and ball valve, and whooshing spray arms. A knock or bang usually means something is hitting a spray arm.

Spotty glasses and damp dishes? Check the rinse aid first.
Fill the rinse aid dispenser to the indicated level without overfilling, raise the L0 to L6 setting one step if you see spots and poor drying, and keep the detergent dose matched to your water hardness.
When observation becomes a service request.
Leave internal testing to a technician.
Book a visit if the keypad still doesn’t respond after unlocking and a 5-minute power-off. For a shorted keypad Frigidaire says service may need to replace the keypad.
Arrange a diagnosticSources and model boundaries.
These documents back up the Frigidaire dishwasher controls not responding advice. Use the manual that matches your model.
- Dishwashers: How do I set the child lock feature? (KB 1836488)
- Dishwashers Flashing Lights (KB 1829621)
- Dishwasher Use & Care, A117867311
Follow the instructions written for your own model. See how we research these pages.
How do I turn off the child lock on a Frigidaire dishwasher?
Hold Delay Start for 3 seconds on plastic tub models until the lock light goes out. On stainless steel tub models, press Delay Start until loc disappears from the display.
Why does my dishwasher show loc?
The controls are locked. Frigidaire’s KB says the child lock stops accidental setting changes or starts. Press Delay Start until loc clears.
Will switching the power off reset the keypad?
It may. For a shorted keypad Frigidaire says to turn off power for 5 minutes. If the lights come back, the keypad needs service.
Is a keypad that ignores me always the child lock?
No. Check the lock first, then the door, power and any code. If none applies, book a visit and note what the lights do.
Code / problem / part / repair
From the code to what you do next.
iC0
iC0 means a problem has been detected with the electronic control system. The manual's only owner step is the reset: Cancel, or power off at the breaker for 5 minutes. If iC0 returns, book a technician.
Frigidaire dishwasher noises
Most dishwasher sounds are part of a normal cycle. Frigidaire’s noise guide lists hissing from the water valve, humming from the wash and drain pumps, and a clunk when the detergent cup opens. A knock or bang usually means something is hitting a spray arm.
Control keypad
The keypad is the set of keys or touch pads that tells the control what to do. Frigidaire lists F1 as “Shorted Key Pad” on range ovens, and its dishwasher guide says a shorted keypad drains the unit and flashes its lights. Both guides begin with a power reset.
Dishwasher repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.
