Start from the symptom
Frigidaire dishwasher lights flashing.
Flashing lights on a Frigidaire dishwasher have three listed meanings: a power failure, a door that isn’t closed, or a shorted keypad. The pattern tells you which, and the first two clear on their own once you act.

Start with safe observations.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Hi-Temp Wash and Heat Dry flashing
This pattern means the power failed. Press Start/Cancel to stop the flashing. On displays that show a code, the same event appears as PF.
- 2
Cycles, Option and Washing flashing
You get this after pressing Start/Cancel with the door not closed. Close the door and the flashing stops and the cycle should begin.
- 3
Status lights flash and it drains
That pattern points to a shorted keypad. Turn the power off for 5 minutes at the breaker, then power it back on. Frigidaire says this may clear the code.
- 4
Check what the display shows
If your model shows a letter code instead of flashing lights, look it up by code. Door messages CL or Cd and PF (power loss) are the ones that match these light patterns.
Systems a technician may investigate.
These parts are linked to the problem. What you noticed does not prove any one of them has failed.
If the display adds a code.
Power
PF means the dishwasher lost power. Press START/CANCEL to clear the code and begin a new cycle. After a hard power failure, the 2020 guide says pressing Start within 18 hours can resume the cycle where it stopped.
Door
CL, also shown as Cd, means the dishwasher door hasn't been closed and latched. Close it fully and the code clears. If you can't get the door to close, contact service to check it.
Read the related care guide.

Strange noise from the dishwasher? Start here.
Most dishwasher sounds are part of a normal cycle. Frigidaire's noise guide lists hissing from the water valve, humming from the wash and drain pumps, clunks from the detergent cup and ball valve, and whooshing spray arms. A knock or bang usually means something is hitting a spray arm.

Spotty glasses and damp dishes? Check the rinse aid first.
Fill the rinse aid dispenser to the indicated level without overfilling, raise the L0 to L6 setting one step if you see spots and poor drying, and keep the detergent dose matched to your water hardness.
When observation becomes a service request.
Leave internal testing to a technician.
Book a visit if the status lights come back after the 5-minute power-off. Frigidaire’s article says the keypad may then need replacing, and that is not an owner repair.
Arrange a diagnosticSources and model boundaries.
These documents back up the Frigidaire dishwasher lights flashing advice. Use the manual that matches your model.
- Dishwashers Flashing Lights (KB 1829621)
- Dishwasher Error Codes and Alarms Guide (KB 1829620)
- Dishwasher Use & Care, A117867311
Follow the instructions written for your own model. See how we research these pages.
Why are my dishwasher lights flashing after a power cut?
Hi-Temp Wash and Heat Dry flash after a power failure. Press Start/Cancel to stop it and start a new cycle.
Why do three lights flash when I press Start?
The door isn’t closed. Frigidaire says the Cycles, Option and Washing lights flash in that case. Close the door fully and the cycle should start.
How do I clear a shorted keypad?
Switch the dishwasher off at the breaker for 5 minutes and switch it back on. If the lights return, Frigidaire says the keypad may need replacing, so book a visit.
Do the lights look the same on every Frigidaire dishwasher?
No. Light names differ by model, and displays show codes. Match what you see to your manual, or tell us the lights and any code when you book.
Code / problem / part / repair
From the code to what you do next.
PF
PF means the dishwasher lost power. Press START/CANCEL to clear the code and begin a new cycle. After a hard power failure, the 2020 guide says pressing Start within 18 hours can resume the cycle where it stopped.
Frigidaire dishwasher noises
Most dishwasher sounds are part of a normal cycle. Frigidaire’s noise guide lists hissing from the water valve, humming from the wash and drain pumps, and a clunk when the detergent cup opens. A knock or bang usually means something is hitting a spray arm.
Control keypad
The keypad is the set of keys or touch pads that tells the control what to do. Frigidaire lists F1 as “Shorted Key Pad” on range ovens, and its dishwasher guide says a shorted keypad drains the unit and flashes its lights. Both guides begin with a power reset.
Dishwasher repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.
