Start from the symptom
Frigidaire cooktop gas cooktop burner will not ignite.
Start at the knob: it must be pressed in and rotated all the way to Lite before the burner catches. Next confirm that the ports are open, the cap sits level, and, where the range has electric ignition, the cord is seated. Only clean ports when the burner is off and cool.

Start with safe observations.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Smell for gas first
A gas smell rules out any flame, any switch and any phone call from inside. Get out of the building and reach the gas company from outside, as the range manual instructs.
- 2
Push in and turn the knob fully
The manual wants the knob pressed in and rotated fully to Lite until the burner lights. After that, dial back to the flame you want.
- 3
Check the cap and head
Caps must be present, level and seated on the burner heads. A cap that is not seated properly can stop a burner from lighting.
- 4
Clear the ports when cool
Once the burner is off and cool, a fine wire or a needle clears the head slots and the ignition ports. Frigidaire's cleaning guide also allows a toothpick or a port brush.
- 5
Check power on electric-ignition models
The range power cord must be firmly in the outlet. Also check the breaker or fuse box, since a broken circuit stops the igniter.
- 6
After a power cut
When the power is out, the section on setting surface controls explains how to light burners by hand.
More about this symptom.
What do the Frigidaire documents say to check first?#
The manual's cooktop table lists a knob not turned to Lite, clogged ports, an unplugged cord on electric-ignition models, a broken circuit and a power outage. The knowledge base adds cap seating.
How should the burner caps sit?#
Level, firm and fully down on each burner head. Frigidaire says no cap may be missing and each must rest level. Your care and cleaning chapter shows the exact placement for your model.
Which clear sign says a visit is due?#
Once knob, cap, ports and power are confirmed and the burner is still dark. The igniter or spark module then needs testing. Book a technician, and stop at once if gas can be smelled.
Systems a technician may investigate.
These parts are linked to the problem. What you noticed does not prove any one of them has failed.

Gas burner and ignitor
On a Frigidaire gas range each surface burner has a cap, a burner head and an electronic ignitor that sparks when you turn the knob to Lite. If a burner won’t light, Frigidaire starts with the knob, the caps, the ports and the power cord. The oven’s bake burner is a different part, and some gas ranges are under CPSC recall 26-333 for it.

Gas cooktop burner head and cap
Each gas burner has a head with ports and slots that shape the flame, and a cap on top. Frigidaire blames uneven flames on clogged ports or a cap that has not seated, and asks you to clean only a cold, switched-off burner using a soft brush plus a toothpick or fine wire.
If the display adds a code.
This topic has no code tied to it.
No other researched code is tied to this topic. Check the exact message in your model manual rather than borrowing another code from the library.
See the research statusWhen observation becomes a service request.
Leave internal testing to a technician.
You smell gas.
A burner stays dark once the ports and cap are clear.
The igniter clicks forever with no flame on one burner only.
The range lost power and burners stay dead after it returns.
Arrange a diagnosticSources and model boundaries.
These documents back up the Frigidaire gas cooktop burner will not ignite advice. Use the manual that matches your model.
- What should I do if some or all of my burners are not lighting? (KB 1852985)
- Gas Cooktop Ignition Port Cleaning Guide
- User Manual, Gas Range, A30923903
Follow the instructions written for your own model. See how we research these pages.
Why do all my Frigidaire gas burners fail at once?
Look at what they share: a range power cord that has come loose, a tripped breaker, or a power outage. The manual lists all three for burners that do not ignite. If power is fine, then look at the knob and the ports.
How far do I turn the knob?
Press it in and rotate it all the way to Lite, hold until the flame appears, then adjust. One listed cause of no ignition is a knob that stopped short of Lite.
Which tool is right for the ports?
A fine wire or needle, used while the burner is off and cool, per the gas range manual. Frigidaire's cleaning guide also names a toothpick, paperclip or port brush. Keep steel wool and oven cleaner away from the head.
Can I light a burner by hand when the power is out?
Yes. On models with electric ignition the manual describes lighting burners by hand during an outage. Use its setting-surface-controls section and keep your face and sleeves clear of the flame.
Is a gas burner that will not light dangerous?
Not by itself, but gas can escape while a burner clicks. With any gas smell, get out and phone the gas company. Without one, work through the list and schedule a repair if the burner still fails.
Code / problem / part / repair
From the code to what you do next.
Frigidaire cooktop flame uneven, orange or too high
An uneven flame usually means clogged ports or a cap that is not seated. An orange flame can come from dust in the gas line, which clears in a few minutes, or from a wrong L.P. conversion. A flame set too high points to the knob, the cap or the L.P. kit.
Gas burner and ignitor
On a Frigidaire gas range each surface burner has a cap, a burner head and an electronic ignitor that sparks when you turn the knob to Lite. If a burner won’t light, Frigidaire starts with the knob, the caps, the ports and the power cord. The oven’s bake burner is a different part, and some gas ranges are under CPSC recall 26-333 for it.
Cooktop repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.
