Inside the appliance

Water inlet valve. In plain English.

The water inlet valve opens to let supply water into the appliance, and shuts to stop it. Frigidaire’s guides name it for dishwasher codes i10 and i30, for refrigerator ice maker and dispenser water, and for washer filling. Hissing or buzzing as it opens is normal.

Last reviewed

Brass water inlet solenoid valve with a black coil, two terminals and a threaded hose fitting on a bench.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Water inlet valve in the appliance

It sits where the supply line meets the appliance. Frigidaire says on a refrigerator it is at the back, so you pull the unit out to reach it. The dishwasher and washer pages don’t show its position.

The photo shows the kind of part. It is not a guide to the right replacement for your model.

Owner care, within the model instructions.

Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.

  1. 1

    Confirm the shutoff is open

    For a dishwasher that isn’t filling or shows i10, Frigidaire says to check the water valves are open, nothing blocks the valve and the supply line isn’t pinched.

  2. 2

    Look at the connections

    For i30 and for refrigerator leaks, check the supply line and valve connections for looseness or kinks. On a refrigerator, pull the unit out and wipe the line and valve to see whether they are wet.

  3. 3

    Know the normal sounds

    Frigidaire says hissing is the first sound a dishwasher makes as water goes through the valves. A refrigerator valve buzzes each time it fills the ice maker, and a washer clicks as valves open.

  4. 4

    Check the supply on a washer

    If a washer won’t start or fill, Frigidaire says the water valves must be on and house pressure high enough.

Cleaning or replacement?

Leave internal testing to a technician.

Book a visit if a dishwasher keeps showing i10 or i30 after the checks, if a connection is wet and still leaks after you hand-tighten it, or if the valve chatters loudly. Don’t take the valve off.

Arrange a diagnostic

Sources and model boundaries.

These documents back up the Water inlet valve advice. Use the manual that matches your model.

  • Dishwasher - Not Filling (KB 1835628)
  • Dishwasher Use & Care, A117867311
  • Dishwasher Noise Guide (KB 1928400)
  • Refrigerator Water Leaks (KB 1847166)
  • Refrigerators Noise Guide (KB 1902166)
  • What should I do if my washer does not start? (KB 1853029)

Follow the instructions written for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What does i10 mean?

Frigidaire’s dishwasher table says i10 is a low fill. Look for a pinched supply line or a shutoff that isn’t fully open, then reset. If it stays, book a technician.

What does i30 have to do with the inlet valve?

i30 means a leak or overflow is detected in the bottom pan. Frigidaire says to look for loose connections at the water inlet valve and to make sure the unit is level, then reset.

Is a buzzing refrigerator valve normal?

Yes. Frigidaire’s noise guide says the water valve buzzes each time it opens to fill the ice maker. A loud chatter with the ice maker on and no water hooked up is not normal.

Why does my washer hum while filling?

Frigidaire says humming can come from the water valve, and tells you to make sure the water is turned on and flowing. Steady filling noise is expected.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.