Start from the symptom

Frigidaire washer noisy or shaking.

Many washer sounds are normal, but banging and shaking usually trace to level, the load or shipping parts. Frigidaire’s noise guide asks first whether the washer is new, then whether it’s level and on firm flooring. Thumping at the start of a spin with a heavy load is common.

Last reviewed

A top-load washer mid-spin, blurred with motion, a hand on its lid and a bunched heavy rug pressed against one side of the tub.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Start with safe observations.

Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.

  1. 1

    Shipping materials

    On a newly installed washer, look for foam under the unit and for shipping bolts.

  2. 2

    Level and floor

    Level it front to back and side to side so each leg sits solidly. Turn a leg in or out, then tighten its lock nut. Legs shouldn’t extend more than 1/2 inch below the washer. Avoid carpet or loose plywood.

  3. 3

    Balance the load

    Turn the power off, wait for the lid to unlock and spread the clothes out. With a small load, add one or two similar items.

  4. 4

    Hoses and stacked units

    Secure drain hoses with zip ties so they don’t slap or knock the back. If the washer is stacked, check the stacking kit, the feet and the brackets.

  5. 5

    Rattling or clanking

    Coins or belt buckles can rattle. Run an empty cycle, and fasten fasteners or turn clothes inside out. If it continues, objects may be in the pump.

  6. 6

    Sounds Frigidaire calls normal

    Clicks from the lid lock and water valves, gurgling when draining, a jet-engine whine at spin, and a low hum from the drain pump.

If the display adds a code.

Keep the exact message.

We have not researched code meanings for this appliance yet. Use its manual and add a photo of the display to your request.

See the research status

When observation becomes a service request.

Leave internal testing to a technician.

Book a visit if rattling continues on an empty cycle (the manual says objects may be in the pump), if shaking continues after leveling and balancing, or if E4 or E5 keeps coming back. Don’t remove pump parts yourself.

Arrange a diagnostic

Sources and model boundaries.

These documents back up the Frigidaire washer noisy or shaking advice. Use the manual that matches your model.

  • Laundry Washers Noises Guide (KB 1820062)
  • Top Load Washers - What may cause my washer to vibrate? (KB 1848685)
  • All about the Use & Care of your Washer, A29259301

Follow the instructions written for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Why does my Frigidaire washer shake?

Usually the load is unbalanced or the washer isn’t level. Rebalance the load, and adjust the legs until it sits firm. Also check for shipping bolts.

Is thumping at the start of the spin normal?

Frigidaire says heavy loads can cause a thump at the start of the spin. If it keeps up, redistribute the load and check the shipping bolts.

What causes a clanking sound?

Frigidaire names coins, safety pins and metal fasteners. Run an empty cycle; if it still clanks, objects may be in the pump and it needs a visit.

Does the lid lock make noise?

Yes. A double click when the lid lock engages or releases is normal on a Frigidaire top-load.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.