Inside the appliance
Control keypad. In plain English.
The keypad is the set of keys or touch pads that tells the control what to do. Frigidaire lists F1 as “Shorted Key Pad” on range ovens, and its dishwasher guide says a shorted keypad drains the unit and flashes its lights. Both guides begin with a power reset.

Where it fits.
Control keypad in the appliance
It is the panel of keys or touch pads on the oven control or on the dishwasher’s control strip. The manuals don’t describe the circuitry behind it, and you shouldn’t open it.
The photo shows the kind of part. It is not a guide to the right replacement for your model.
What you notice when this part needs attention.
Trouble with the Control keypad can show up as weaker performance or a code that keeps coming back. Only testing shows whether this part is the cause.

Frigidaire oven clock flashing or timer not working
A flashing 12:00 on a Frigidaire range means the control lost power and forgot the time. The manuals say the clock must be set before the oven will run, so set it first. Then check the 12/24-hour mode, the minute timer, a dash on the display and Delay Start. If the clock keeps resetting without a power cut, book a technician.

Frigidaire oven controls not responding
On Frigidaire ovens, controls that ignore your touch are most often locked. Frigidaire’s article says a dash on the display means the lock is on, and holding OFF for 6 seconds releases it. If the display shows F1, the keypad reports a short, and the owner step is a power reset for up to 30 seconds.
Owner care, within the model instructions.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Rule out the lock
A locked control looks like a dead keypad. On a range, hold the lock key for 3 seconds. On many dishwashers, hold Delay Start for 3 seconds, or until “loc” goes away on stainless models.
- 2
Reset the power
For F1, Frigidaire says to disconnect power for up to 30 seconds. The range manual says to leave it off 5 minutes. For the dishwasher, switch power off for 5 minutes.
- 3
Keep the panel dry
The range manual says not to spray liquid onto the control and not to use large amounts of water on it, since excess water there can damage the appliance. Use a soft damp cloth.
- 4
Note what it shows
Write down whether you see F1, which dishwasher lights flash, and whether the unit drained. That tells a technician what happened.
Cleaning or replacement?
Leave internal testing to a technician.
Book a visit if F1 returns after the reset, or if the dishwasher keeps flashing after its 5-minute power-off. Frigidaire’s dishwasher guide says a keypad that keeps showing the code may need replacing.
Arrange a diagnosticSources and model boundaries.
These documents back up the Control keypad advice. Use the manual that matches your model.
- Ranges Error Code F1 - Shorted Key Pad (KB 1846381)
- Dishwashers Flashing Lights (KB 1829621)
- Dishwashers: How do I set the child lock feature? (KB 1836488)
- User Manual, Electric Range, A30923902
Follow the instructions written for your own model. See how we research these pages.
What does F1 mean on a Frigidaire range?
Frigidaire lists F1 as “Shorted Key Pad” for electric ranges and gives no cause. Its step is to disconnect power for up to 30 seconds, then see whether the code returns.
Why is my dishwasher flashing lights and draining?
Frigidaire’s flashing-lights guide ties that pattern to a shorted keypad. Turning off the power for 5 minutes may clear it; if it keeps coming back, service should be scheduled.
Is my keypad broken or just locked?
Check the lock first. Frigidaire says a locked control can’t be used for new selections until you release the lock, which on a range or dishwasher takes a 3-second press.
Can water on the control cause trouble?
The range manual warns that excess water on the control area may damage the appliance. Use a lightly damp cloth, and don’t spray cleaner directly on the display or keys.
Code / problem / part / repair
From the code to what you do next.
F1
F1 is listed by Frigidaire as “Shorted Key Pad” for range ovens, with no explanation past the name. Press OFF, reset the power, set the clock and retry Bake or Broil. If F1 returns, arrange service.
Frigidaire oven clock flashing or timer not working
A flashing 12:00 on a Frigidaire range means the control lost power and forgot the time. The manuals say the clock must be set before the oven will run, so set it first. Then check the 12/24-hour mode, the minute timer, a dash on the display and Delay Start. If the clock keeps resetting without a power cut, book a technician.
Oven repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.

