What it means
F30 is the entry Frigidaire lists as “Open Probe” for range ovens. The sources give no cause or part beyond the name. Reset the power, set the clock and retry Bake or Broil, then arrange service if F30 repeats.
Frigidaire oven F30 / Probe
F30 is the entry Frigidaire lists as “Open Probe” for range ovens. The sources give no cause or part beyond the name. Reset the power, set the clock and retry Bake or Broil, then arrange service if F30 repeats.
Also shown as F30
F30 is the entry Frigidaire lists as “Open Probe” for range ovens. The sources give no cause or part beyond the name. Reset the power, set the clock and retry Bake or Broil, then arrange service if F30 repeats.
If you smell gas, don't light anything, don't touch an electrical switch and don't use a phone inside; call your gas supplier from a neighbor's.
F30 returns after the power reset, the clock step and another try at Bake or Broil.
Your checklist / kept on this device

Press OFF so the code disappears, then try Bake or Broil to see whether the oven runs.

The Owner Center article and the oven codes guide say to disconnect the range for up to 30 seconds, by unplugging it or switching the breaker off and on. The guide adds that a breaker also resets everything else on that circuit. The electric and gas range manuals ask for 5 minutes with the power off, so use your own manual's time.

With power restored, set the clock and run Bake or Broil again. Press OFF if the code reappears.

A repeat code after these steps is where the sources stop. For a range installed within its first 30 days, Frigidaire's article points you back to the installer; later than that, it says to arrange service.
Tell us the model and what you have already checked, and start the request right here.
Book a visit
Simplified schematic; real layouts differ by model. Tap an outlined part for its photo and the check that goes with it.

Component reference
On electric ranges Frigidaire prints F30 as Open Probe and F31 as Shorted Probe.
Read the definitionFrigidaire's sources don't say so. They list the name, give a reset, and say to arrange service when the code repeats.
Read the supporting manualThe oven codes guide offers it when you can't reach the plug. Because the breaker feeds more than the range, other things on that circuit lose power too.
Read the supporting manualManufacturer document
Frigidaire / Owner Center knowledge base
Owner Center article, cached 10.11.2026 (no edition date printed) / Article text
Manufacturer document
Frigidaire / Owner Center knowledge base
Owner Center article, cached 10.11.2026 (no edition date printed) / Article text
Manufacturer document
Frigidaire / Electrolux
Current edition (20 pages, no date printed) / PDF p.17 (Troubleshooting)
Manufacturer document
Frigidaire / Electrolux
Current edition (20 pages, no date printed) / PDF p.16 (Troubleshooting)
Manufacturer document
Frigidaire / Owner Center knowledge base
Owner Center article, cached 10.11.2026 (no edition date printed) / Article text
Manufacturer document
U.S. Consumer Product Safety Commission
Recall notice, March 19, 2026 / Recall notice
The F30 article is marked as applying to electric ranges. Gas and induction range manuals print only the general F or E step with no meaning for F30. The reset time differs by source, so the manual for your model decides.
Frigidaire lists it as “Open Probe”. That is the only meaning printed. The sources name no cause and no part to replace.
Yes, the oven codes guide allows that when you can't unplug the range. It notes the breaker also resets whatever else shares the circuit, so expect other items to restart.
The Owner Center material says up to 30 seconds and the range manuals say 5 minutes. Both are from Frigidaire, and the manual for your model is the one to follow.
Stop restarting it. The manuals treat a repeat after the reset steps as the signal to call for service, and the article tells you whom to contact based on when the range was installed.
Code / problem / part / repair
F31 is listed by Frigidaire as “Shorted Probe” for its range ovens, and the sources add no cause beyond that name. Press OFF, reset the power, set the clock and try Bake or Broil again. If F31 comes back, arrange service.
A flashing 12:00 on a Frigidaire range means the control lost power and forgot the time. The manuals say the clock must be set before the oven will run, so set it first. Then check the 12/24-hour mode, the minute timer, a dash on the display and Delay Start. If the clock keeps resetting without a power cut, book a technician.
On electric ranges Frigidaire prints F30 as Open Probe and F31 as Shorted Probe. The sources add nothing beyond those names. The home step is the power reset in the pages: disconnect for up to 30 seconds, then try again.
Book a diagnostic for your model, done at your home.
Office addresses and the entry details to have ready.