Start from the symptom
Frigidaire washer smells.
Frigidaire links washer odors to damp laundry and trapped moisture. Take clothes out promptly, leave the lid open between loads, wipe the washer down and run the Tub Clean cycle on schedule. Its care article names no other cause.

Start with safe observations.
Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.
- 1
Unload promptly
Don’t leave wet clothes in the washer, since this is the first thing Frigidaire lists to prevent odors.
- 2
Let it air out
Leave the lid open for a while, or whenever the washer is idle, to let humidity out.
- 3
Wipe the outside
Clean the top and sides with a damp cloth or mild soap and water, and avoid moisture build-up.
- 4
Deal with residue
After heavily soiled loads, shake or brush dirt and sand off first. If residue remains in the tub, wipe it with a non-abrasive household cleaner and run the Rinse Only cycle.
- 5
Run Tub Clean
Most models have a Tub Clean cycle (also named System clean or Clean Washer). Frigidaire says to run it once a month or every 50 loads, depending on your model. Check your manual for yours.
Systems a technician may investigate.
These parts are linked to the problem. What you noticed does not prove any one of them has failed.
If the display adds a code.
Keep the exact message.
We have not researched code meanings for this appliance yet. Use its manual and add a photo of the display to your request.
See the research statusRead the related care guide.

Smelly washer? A monthly Tub Clean and an open lid do most of the work.
Clean a Frigidaire top-load washer by running Tub Clean about once a month with one cup of liquid chlorine bleach or a washing machine cleaner pouch, then Rinse & Spin. Between times, empty it promptly and dry the lid area.

A code on your Frigidaire washer? Find your type first.
Frigidaire washer codes depend on the type. Top-load washers use E1 to E5, CL and a few F-codes. Current front-load washers use AL alarms such as AL 10 and AL 20. Older front-load E-codes like E11 or E23 are not in any current Frigidaire source.
When observation becomes a service request.
Leave internal testing to a technician.
Book a technician if the smell survives a Tub Clean cycle and a few days with the lid open, or if it smells like burning. The sources give no other owner steps. A burning smell means stop using the washer and unplug it.
Arrange a diagnosticSources and model boundaries.
These documents back up the Frigidaire washer smells advice. Use the manual that matches your model.
- Top Load Washers - How do I care and clean my Frigidaire Top Load washer? (KB 1848678)
- All about the Use & Care of your Washer, A29259301
Follow the instructions written for your own model. See how we research these pages.
How often should I run Tub Clean?
Frigidaire says once a month or every 50 loads, depending on your model. Your manual names the cycle for your washer.
Should I leave the lid open?
Yes. Frigidaire says leaving the lid open for a little while, or when the washer isn’t in use, helps stop odors and humidity building up.
What if the tub has a dirty film?
Wipe it with a non-abrasive household cleaner, then run the Rinse Only cycle. Frigidaire also says to shake off heavy dirt or sand before washing.
Does a smell mean something is broken?
Not usually; Frigidaire’s article ties odors to moisture and residue. If it stays after Tub Clean and airing, or smells burnt, book a visit.
Code / problem / part / repair
From the code to what you do next.
Frigidaire washer not spinning
On a top-load Frigidaire, the usual cause is an unbalanced load or a lid that isn’t closed. Frigidaire’s tub-not-spinning article says to power off, wait for the lid to unlock, rearrange the clothes and restart. After that it checks load size, shipping materials, level and hose connections.
Washer tub and Tub Clean cycle
Frigidaire’s odor advice for washers starts with moisture: unload wet clothes promptly, leave the lid open when the washer is idle, and run the Tub Clean cycle (also named System Clean or Clean Washer), monthly or every 50 loads depending on model. Front-load guides add the rubber gasket folds.
Washer repair
Book a diagnostic for your model, done at your home.
Find your metro
Office addresses and the entry details to have ready.
