Start from the symptom

Frigidaire dishwasher noises.

Most dishwasher sounds are part of a normal cycle. Frigidaire’s noise guide lists hissing from the water valve, humming from the wash and drain pumps, and a clunk when the detergent cup opens. A knock or bang usually means something is hitting a spray arm.

Last reviewed

Hand resting flat on a stainless dishwasher door that is slightly ajar, a drinking glass tipped over against the rack tines visible inside
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Start with safe observations.

Turn the appliance off and unplug it before any owner check. Look out for standing water and sharp debris. Never touch a wet plug or wiring, take off service panels, or go past the owner steps in your manual.

  1. 1

    Match the sound to the moment in the cycle

    Frigidaire’s guide ties each sound to a step. Hissing is water entering through the valve. Humming comes from the wash pump, which starts and stops as the spray arms alternate, or from the drain pump near the end. One clunk per cycle is the detergent cup opening.

  2. 2

    Look for a dish hitting a spray arm

    Knocking, banging or repeated clunking can come from a dish, pan or utensil that stops a spray arm turning. The guide names an item that is too tall as a common cause. Once the cycle is stopped and the dishwasher is cool, rearrange the load so both arms clear everything.

  3. 3

    Remember the ball valve and the whoosh

    A clunk when the spray arms switch is the ball valve, and a changing whoosh is the water moving between the lower and upper arms. Frigidaire lists both as normal.

  4. 4

    Fan-assisted drying makes noise too

    On models with the Even Dry or Perfect Dry system, hearing the fan at different points in a cycle is normal. If you find yourself hearing a fan you didn’t expect, check which dry option you picked.

If the display adds a code.

This topic has no code tied to it.

No other researched code is tied to this topic. Check the exact message in your model manual rather than borrowing another code from the library.

See the research status

When observation becomes a service request.

Leave internal testing to a technician.

Book a visit if a knock, grind or hum continues after you’ve cleared the spray arms and rearranged the load. The Frigidaire sources list no further owner steps for noise, so the cause needs to be found with the dishwasher open.

Arrange a diagnostic

Sources and model boundaries.

These documents back up the Frigidaire dishwasher noises advice. Use the manual that matches your model.

  • Dishwasher - Noise Guide (KB 1928400)
  • Dishwashers - What are normal dishwasher operations sounds? (KB 1847433)
  • Dishwasher Use & Care, A23587501B

Follow the instructions written for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Is it normal for my Frigidaire dishwasher to hum?

Yes. Frigidaire lists humming from the wash pump, which starts and stops as the spray arms alternate, and from the drain pump, which is steady and then varies as the last water leaves.

Why does it clunk once a cycle?

That is the detergent cup opening. Frigidaire says the clunk happens once per cycle when detergent is released. A clunk that repeats can be the ball valve or a tall item hitting a spray arm.

What does a knocking sound mean?

A dish, pot, pan or utensil is probably blocking or hitting a spray arm. Stop the cycle, move the item and run it again. Book a visit if the knock stays.

Is there a sound that means I should stop using it?

The sources don’t name one. Stop it and book if you smell burning, see water on the floor, or hear grinding that wasn’t there before.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.