Model-specific code library

Frigidaire oven error codes.

The Frigidaire range manuals we read give one shared step for any F or E message. Only the Owner Center articles for electric ranges name individual codes, and we decode only those.

Oven code finder

F3 is listed by Frigidaire as “Communication Error” for range ovens. No cause is printed. F20 and F26 carry the same name in the guide and have their own pages. Press OFF, reset the power, set the clock and retry; arrange service if it returns.

Read the F3 checks
Or choose

9 researched oven codes. Codes differ from model to model; your manual has the final word.

Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Messages with a manual behind them.

DEMO MODE

Mode, not a failure

A Frigidaire oven showing DEMO MODE is running its showroom display setting, which is not a breakdown. Drop the oven's circuit at the house panel for three-quarters of a minute, restore it, then open the oven's setup screens and switch the Demo entry off.

No action needed
F1

Control panel

F1 is listed by Frigidaire as “Shorted Key Pad” for range ovens, with no explanation past the name. Press OFF, reset the power, set the clock and retry Bake or Broil. If F1 returns, arrange service.

Model-dependent / read first
F10

Heating

F10 on a Frigidaire wall or standard oven is a Thermal Runaway alert: the control senses more heat than normal and is protecting the appliance. Switch it off, wait until it is cold, and only then think about cooking again.

Stop using the oven
F20

Communication

F20 is listed by Frigidaire as "Communication Error" for range ovens, in the same article as F3. No cause is printed. Press OFF, reset the power, set the clock and retry; arrange service if it returns.

Model-dependent / read first
F26

Communication

F26 appears in Frigidaire's range code guide (KB 1846380) under the name "Communication Error", with F3 and F20. The dedicated article does not name F26. Press OFF, reset the power, set the clock and retry; arrange service if it returns.

Model-dependent / read first
F3

Communication

F3 is listed by Frigidaire as “Communication Error” for range ovens. No cause is printed. F20 and F26 carry the same name in the guide and have their own pages. Press OFF, reset the power, set the clock and retry; arrange service if it returns.

Model-dependent / read first
F30

Probe

F30 is the entry Frigidaire lists as “Open Probe” for range ovens. The sources give no cause or part beyond the name. Reset the power, set the clock and retry Bake or Broil, then arrange service if F30 repeats.

Model-dependent / read first
F31

Probe

F31 is listed by Frigidaire as “Shorted Probe” for its range ovens, and the sources add no cause beyond that name. Press OFF, reset the power, set the clock and try Bake or Broil again. If F31 comes back, arrange service.

Model-dependent / read first
F90

Door and lock

F90 on a Frigidaire oven signals a lock problem with the door, and F91 to F94 sit in the same row. Use UNLOCK and what the screen asks to free the door, then remove power for half a minute to wipe a false reading.

Owner checks first

Start with the model boundary.

Stainless freestanding gas range in a kitchen with walnut cabinets

Range manuals print one rule, not a list.

The Frigidaire range manuals we read give one shared step for any F or E message. Only the Owner Center articles for electric ranges name individual codes, and we decode only those.

The gas, induction and wall oven documents print no code-by-code table, so a code name from the electric range articles is not carried over to them. F15, F2, F14, F7, F8, F9, F4, F0, F5 and F6 appear in none of these documents.

Choose the next safe action.

Read the whole display

Write down the full message and the model from the nameplate before you press OFF. The manuals and the Owner Center disagree on the reset wait, 5 minutes in the manuals and up to 30 seconds in the articles, so the pages quote each one separately.

Respect the service boundary

Power off at the breaker before anything behind a panel. A gas smell, or an oven that lights late, means stop using the oven and book a technician. Check the CPSC recall 26-333 notice if the range is a gas model.

Documents checked for this library.

  • User Manual, Electric Range, A30923902
  • User Manual, Gas Range, A30923903
  • User Manual, Induction Range, A30908704
  • User Manual, Wall Oven, A30904902
  • Ranges - Error Code Guide (KB 1846380)

Follow the instructions written for your own model. See how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Are these oven meanings universal?

The gas, induction and wall oven documents print no code-by-code table, so a code name from the electric range articles is not carried over to them. F15, F2, F14, F7, F8, F9, F4, F0, F5 and F6 appear in none of these documents.

Which details help when I report a code from my oven?

Take a photo of the whole oven display and of the model label. Add what the appliance was doing at the time, and skip explanations written for other appliances.

Why do some oven codes have no meaning listed?

An old search phrase is not proof of what a code means. When our oven sources do not explain a message, we keep its name as written and point you to help, without naming a part or a cause.

How do I know which oven models a code applies to?

Open the oven documents in this library and check the models listed on their covers against your label. A different model calls for its own instructions.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.