Frigidaire oven F2 / Oven

Frigidaire oven
error F2

Frigidaire does not list F2 for ovens. F2 shows up in its articles only for washers, which is a different appliance. For a range, follow the generic F-code steps: OFF, a power reset, set the clock, retry, then book a technician if F2 recurs.

No meaning given in the documents we checked

Last reviewed

F2
Oven
Manual evidence

What the manual says about Frigidaire oven F2.

Manual evidence

The range manuals give one row for any F or E code on the display and the code guide leaves F2 out. In Frigidaire's laundry documents F2 means too many suds on a front-load washer (KB 1825280) and a failed control board on a top-load washer (A29259301 p.18).

Safe first steps.

  1. 1

    Press OFF

    The Frigidaire range manuals start here: press the OFF key to clear the code, then try Bake or Broil.

  2. 2

    Cut the power, then restore it

    If the code repeats, the electric and gas range manuals say to turn off power to the range for 5 minutes. Frigidaire's code guide says up to 30 seconds. Use the time printed in your own manual.

  3. 3

    Set the clock and test again

    After power returns, set the time of day and try Bake or Broil once more. If the code shows again, press OFF to clear it.

Note these details before you book.

Stainless freestanding gas range in a kitchen with walnut cabinets
  • Model and serial number
  • Full display text
  • When the message appears
  • Steps you have already taken

When to call.

F2 is still showing after the power reset, the clock step and a second Bake or Broil test, or the oven has stopped heating.

Book a visit(844) 481-0454

The documents we checked.

Source 1

User Manual, Electric Range, A30923902

Frigidaire / Electrolux / Current edition (20 pages, no date printed) / PDF p.17 (Troubleshooting)

Source 2

User Manual, Gas Range, A30923903

Frigidaire / Electrolux / Current edition (20 pages, no date printed) / PDF p.16 (Troubleshooting)

Source 3

Ranges - Error Code Guide (KB 1846380)

Frigidaire / Owner Center knowledge base / Owner Center article, cached 10.11.2026 (no edition date printed) / Article text

Source 4

Electrolux Group Recalls Frigidaire Gas Ranges Due to Burn Hazard (CPSC recall 26-333)

U.S. Consumer Product Safety Commission / Recall notice, March 19, 2026 / Recall notice

Here to help

Good questions.
Clear answers.

Talk to our team
Does F2 on my oven mean too many suds?

No. That meaning is for a front-load washer in a Frigidaire article. A range has no soapy water, so the washer entry does not carry over.

Is F2 the same as F20?

We have no source that links them. The code guide groups F3, F20 and F26 as a communication error; F2 is not in that group, so do not treat it as one.

Should I replace the control because of F2?

Not on this evidence. No source says what F2 reports on an oven. A technician can test the control and sensors before you buy anything.

What do I tell the technician about F2?

Your model and serial, how long the code stayed after OFF, whether it appeared while heating or at power-up, and which reset time you tried.

Is my gas range covered by the recall?

Some Frigidaire gas ranges are: CPSC recall 26-333 (March 19, 2026) covers delayed bake-burner ignition on listed models and serial numbers. Check yours at https://www.cpsc.gov/Recalls/2026/Electrolux-Group-Recalls-Frigidaire-Gas-Ranges-Due-to-Burn-Hazard.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.