Frigidaire oven F6 / Oven

Frigidaire oven
error F6

F6 is not defined in Frigidaire's range manuals and code guide; the pages we read list one generic F or E code row. Press OFF, reset the power, set the clock and retry Bake or Broil; arrange a technician if the code keeps coming back.

No meaning given in the documents we checked

Last reviewed

F6
Oven
Manual evidence

What the manual says about Frigidaire oven F6.

Manual evidence

None of the range manuals or the code guide (KB 1846380) names F6. The matching entries we found are for other appliances: AL F0 is an anti-flood alarm on a front-load washer, and F5 on a top-load washer is a load-sensing entry. F6 is not confirmed as a keypad code; F1 is the keypad entry in the guide.

Safe first steps.

  1. 1

    Press OFF

    The Frigidaire range manuals start here: press the OFF key to clear the code, then try Bake or Broil.

  2. 2

    Cut the power, then restore it

    If the code repeats, the electric and gas range manuals say to turn off power to the range for 5 minutes. Frigidaire's code guide says up to 30 seconds. Use the time printed in your own manual.

  3. 3

    Set the clock and test again

    After power returns, set the time of day and try Bake or Broil once more. If the code shows again, press OFF to clear it.

Note these details before you book.

Stainless freestanding gas range in a kitchen with walnut cabinets
  • Model and serial number
  • Full display text
  • When the message appears
  • Steps you have already taken

When to call.

F6 is still showing after the power reset, the clock step and a second Bake or Broil test, or the oven has stopped heating.

Book a visit(844) 481-0454

The documents we checked.

Source 1

User Manual, Electric Range, A30923902

Frigidaire / Electrolux / Current edition (20 pages, no date printed) / PDF p.17 (Troubleshooting)

Source 2

User Manual, Gas Range, A30923903

Frigidaire / Electrolux / Current edition (20 pages, no date printed) / PDF p.16 (Troubleshooting)

Source 3

Ranges - Error Code Guide (KB 1846380)

Frigidaire / Owner Center knowledge base / Owner Center article, cached 10.11.2026 (no edition date printed) / Article text

Source 4

Electrolux Group Recalls Frigidaire Gas Ranges Due to Burn Hazard (CPSC recall 26-333)

U.S. Consumer Product Safety Commission / Recall notice, March 19, 2026 / Recall notice

Here to help

Good questions.
Clear answers.

Talk to our team
Does Frigidaire say what F6 means on a oven?

No. Frigidaire does not list F6 for ranges. The similar-looking entries it prints belong to washers.

What should I do first when F6 appears?

Press OFF to clear the code, then try Bake or Broil. If it repeats, turn off power to the range for the time printed in your own manual (5 minutes in the range manuals, up to 30 seconds in the code guide), set the clock and test once more.

Is F6 the same as F0?

We cannot say. Frigidaire describes neither for ranges, so each has its own page. Only F1 is explained there, so check which one you actually see.

When should I book a visit for F6?

Arrange a technician when F6 is still on after the power reset, the clock step and a second Bake or Broil test, or when the oven has stopped heating.

Is my gas range covered by the recall?

Some Frigidaire gas ranges are. CPSC recall 26-333 (March 19, 2026) covers delayed bake-burner ignition on listed models and serial numbers, so check your model and serial against the recall notice.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.