F26 appears in Frigidaire's range code guide (KB 1846380) under the name "Communication Error", with F3 and F20. The dedicated article does not name F26. Press OFF, reset the power, set the clock and retry; arrange service if it returns.
F26 appears in Frigidaire's range code guide (KB 1846380) under the name "Communication Error", with F3 and F20. The dedicated article does not name F26. Press OFF, reset the power, set the clock and retry; arrange service if it returns.
F26 appears in Frigidaire's range code guide (KB 1846380) under the name "Communication Error", with F3 and F20. The dedicated article does not name F26. Press OFF, reset the power, set the clock and retry; arrange service if it returns.
What you can safely check
If you smell gas, don't light anything, don't touch an electrical switch and don't use a phone inside; call your gas supplier from a neighbor's.
When to call a technician
F26 returns after the power reset, the clock step and another try at Bake or Broil.
Your checklist / kept on this device
Safe checks, in order.
0 of 6 checks done
Illustration. Follow your model’s instructions.
Before you begin
Clear it with OFF
Press OFF, then try Bake or Broil. This is the manuals' opening step for any F or E code.
Illustration. Follow your model’s instructions.
Check 2
Reset the power
Unplug the range, or flip its breaker off and on. Frigidaire's article says up to 30 seconds off; the electric and gas range manuals say 5 minutes. Pick the time your manual gives.
Illustration. Follow your model’s instructions.
Check 3
Set the clock and test
Once the display is back, set the clock and run Bake or Broil. Press OFF if the code returns.
Illustration. Follow your model’s instructions.
Check 4
Know which reset time applies to F26
Frigidaire's article gives up to 30 seconds with power removed; the electric and gas range manuals give 5 minutes. Use the time printed in your own manual, and write down which you used.
Illustration. Follow your model’s instructions.
Check 5
Watch whether F26 comes back at once
A code that reappears the moment the display lights points to something stored. A code that waits until you start Bake or Broil is a different clue. Tell us which you saw.
Illustration. Follow your model’s instructions.
Check 6
Arrange service if it repeats
The article tells owners of a range installed within its first 30 days to go back to the installer, and everyone else to arrange service.
Still showing F26?
Tell us the model and what you have already checked, and start the request right here.
F26 appears in Frigidaire's range code guide (KB 1846380) under the name "Communication Error", with F3 and F20. The dedicated article does not name F26. Press OFF, reset the power, set the clock and retry; arrange service if it returns.
The Ranges Error Code Guide lists F26 under Communication Error, but the dedicated article names only F3 and F20. We therefore treat the name with care and add no cause.
Owner Center article, cached 10.11.2026 (no edition date printed) / Article text
Manufacturer document
User Manual, Electric Range, A30923902
Frigidaire / Electrolux
Current edition (20 pages, no date printed) / PDF p.17 (Troubleshooting)
Manufacturer document
User Manual, Gas Range, A30923903
Frigidaire / Electrolux
Current edition (20 pages, no date printed) / PDF p.16 (Troubleshooting)
Manufacturer document
Electrolux Group Recalls Frigidaire Gas Ranges Due to Burn Hazard (CPSC recall 26-333)
U.S. Consumer Product Safety Commission
Recall notice, March 19, 2026 / Recall notice
The F3 article is marked as applying to electric ranges. Gas and induction range manuals print the general F or E step without any meaning for F3. The two reset times in the sources differ, so use the one in your model's manual.