Frigidaire oven F20 / Communication

Frigidaire oven
error F20

Oven / display reference

F20 is listed by Frigidaire as "Communication Error" for range ovens, in the same article as F3. No cause is printed. Press OFF, reset the power, set the clock and retry; arrange service if it returns.

Also shown as F20

Last reviewed

Oven / display reference
Meaning
F20 is listed by Frigidaire as "Communication Error" for range ovens, in the same article as F3. No cause is printed. Press OFF, reset the power, set the clock and retry; arrange service if it returns.
Who handles it
Model-dependent / read first
Related codes
Source
Range Error Code F3 / F20 - Communication Error (KB 1846389)

What Frigidaire oven F20 means.

What it means

F20 is listed by Frigidaire as "Communication Error" for range ovens, in the same article as F3. No cause is printed. Press OFF, reset the power, set the clock and retry; arrange service if it returns.

What you can safely check

If you smell gas, don't light anything, don't touch an electrical switch and don't use a phone inside; call your gas supplier from a neighbor's.

When to call a technician

F20 returns after the power reset, the clock step and another try at Bake or Broil.

Your checklist / kept on this device

Safe checks, in order.

0 of 6 checks done
  1. Frigidaire oven F20: Wall oven pulled out of its cabinet on a lift cart, control panel flipped open to show a green circuit board and wiring, power cord unplugged on the floor
    Illustration. Follow your model’s instructions.
    Before you begin

    Clear it with OFF

    Press OFF, then try Bake or Broil. This is the manuals' opening step for any F or E code.

  2. Glass touch control panel of a stainless range above the oven door, with a few small lit segments on a dark display.
    Illustration. Follow your model’s instructions.
    Check 2

    Reset the power

    Unplug the range, or flip its breaker off and on. Frigidaire's article says up to 30 seconds off; the electric and gas range manuals say 5 minutes. Pick the time your manual gives.

  3. Fingertip pressing one of several outlined touch keys on the glass control panel of a range, with the cooktop below.
    Illustration. Follow your model’s instructions.
    Check 3

    Set the clock and test

    Once the display is back, set the clock and run Bake or Broil. Press OFF if the code returns.

  4. Hand flipping one black breaker switch on an electrical panel with its outer door open, in a laundry room.
    Illustration. Follow your model’s instructions.
    Check 4

    Know which reset time applies to F20

    Frigidaire's article gives up to 30 seconds with power removed; the electric and gas range manuals give 5 minutes. Use the time printed in your own manual, and write down which you used.

  5. Technician in a dark jacket seen from behind holding a tablet with an empty checklist, a range in the background.
    Illustration. Follow your model’s instructions.
    Check 5

    Watch whether F20 comes back at once

    A code that reappears the moment the display lights points to something stored. A code that waits until you start Bake or Broil is a different clue. Tell us which you saw.

  6. Gloved hands holding multimeter probes on a connector at the open lower back of a refrigerator, tool bag nearby.
    Illustration. Follow your model’s instructions.
    Check 6

    Arrange service if it repeats

    The article tells owners of a range installed within its first 30 days to go back to the installer, and everyone else to arrange service.

Still showing F20?

Tell us the model and what you have already checked, and start the request right here.

Book a visit

The touch panel and control.

Conceptual Range / oven sectionKeypad / touch panelControl boardElement wiring123
  1. 3Element wiring

Simplified schematic; real layouts differ by model. Tap an outlined part for its photo and the check that goes with it.

A little more context.

What does F20 mean on a Frigidaire oven?

F20 is listed by Frigidaire as "Communication Error" for range ovens, in the same article as F3. No cause is printed. Press OFF, reset the power, set the clock and retry; arrange service if it returns.

Read the supporting manual

What should I check first?

Clear it with OFF. Press OFF, then try Bake or Broil. This is the manuals' opening step for any F or E code.

Read the supporting manual

When should I book a visit?

F20 returns after the power reset, the clock step and another try at Bake or Broil.

Read the supporting manual

Why does Frigidaire list F20 beside F3?

The dedicated article is titled for both F3 and F20, as Communication Error. It gives no separate meaning for each, so the shared name is all we can report.

Read the supporting manual

The manual behind the message.

Manufacturer document

Range Error Code F3 / F20 - Communication Error (KB 1846389)

Frigidaire / Owner Center knowledge base

Owner Center article, cached 10.11.2026 (no edition date printed) / Article text

Manufacturer document

Ranges - Error Code Guide (KB 1846380)

Frigidaire / Owner Center knowledge base

Owner Center article, cached 10.11.2026 (no edition date printed) / Article text

Manufacturer document

User Manual, Electric Range, A30923902

Frigidaire / Electrolux

Current edition (20 pages, no date printed) / PDF p.17 (Troubleshooting)

Manufacturer document

User Manual, Gas Range, A30923903

Frigidaire / Electrolux

Current edition (20 pages, no date printed) / PDF p.16 (Troubleshooting)

Manufacturer document

Electrolux Group Recalls Frigidaire Gas Ranges Due to Burn Hazard (CPSC recall 26-333)

U.S. Consumer Product Safety Commission

Recall notice, March 19, 2026 / Recall notice

The F3 article is marked as applying to electric ranges. Gas and induction range manuals print the general F or E step without any meaning for F3. The two reset times in the sources differ, so use the one in your model's manual.

Here to help

Good questions.
Clear answers.

Talk to our team
What does F20 mean on a Frigidaire oven?

Frigidaire's range articles list it as "Communication Error". They do not say what is failing to communicate and name no part.

Is F20 the same as F3?

Frigidaire gives both the same name and one article, but no shared cause. F3 has its own page here.

Will resetting the power clear F20?

The sources give the reset as a first step, not a cure. If F20 repeats afterward, they say to arrange service.

Is F20 only an electric oven code?

The article is marked for electric ranges. Gas manuals give only the general F or E step, so treat the name as unconfirmed on a gas range.

Can I keep baking after F20 clears?

If the reset clears F20 and Bake and Broil work normally, the sources list nothing further. If it returns, stop and arrange service rather than resetting repeatedly.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.