Frigidaire oven F0 / Oven

Frigidaire oven
error F0

Frigidaire's range manuals and code guide does not print F0. It lists one generic F or E code row instead. Press OFF, reset the power, set the clock and retry Bake or Broil; arrange a technician if the code keeps coming back.

No meaning given in the documents we checked

Last reviewed

F0
Oven
Manual evidence

What the manual says about Frigidaire oven F0.

Manual evidence

None of the range manuals or the code guide (KB 1846380) names F0. The matching entries we found are for other appliances: AL F0 is an anti-flood alarm on a front-load washer, and F5 on a top-load washer is a load-sensing entry. AL F0 is a front-load washer alarm for the anti-flood device, and a range has nothing like it.

Safe first steps.

  1. 1

    Press OFF

    The Frigidaire range manuals start here: press the OFF key to clear the code, then try Bake or Broil.

  2. 2

    Cut the power, then restore it

    If the code repeats, the electric and gas range manuals say to turn off power to the range for 5 minutes. Frigidaire's code guide says up to 30 seconds. Use the time printed in your own manual.

  3. 3

    Set the clock and test again

    After power returns, set the time of day and try Bake or Broil once more. If the code shows again, press OFF to clear it.

Note these details before you book.

Stainless freestanding gas range in a kitchen with walnut cabinets
  • Model and serial number
  • Full display text
  • When the message appears
  • Steps you have already taken

When to call.

F0 is still showing after the power reset, the clock step and a second Bake or Broil test, or the oven has stopped heating.

Book a visit(844) 481-0454

The documents we checked.

Source 1

User Manual, Electric Range, A30923902

Frigidaire / Electrolux / Current edition (20 pages, no date printed) / PDF p.17 (Troubleshooting)

Source 2

User Manual, Gas Range, A30923903

Frigidaire / Electrolux / Current edition (20 pages, no date printed) / PDF p.16 (Troubleshooting)

Source 3

Ranges - Error Code Guide (KB 1846380)

Frigidaire / Owner Center knowledge base / Owner Center article, cached 10.11.2026 (no edition date printed) / Article text

Source 4

Electrolux Group Recalls Frigidaire Gas Ranges Due to Burn Hazard (CPSC recall 26-333)

U.S. Consumer Product Safety Commission / Recall notice, March 19, 2026 / Recall notice

Here to help

Good questions.
Clear answers.

Talk to our team
Does Frigidaire say what F0 means on a oven?

No. Frigidaire does not list F0 for ranges. The similar-looking entries it prints belong to washers.

What should I do first when F0 appears?

Press OFF to clear the code, then try Bake or Broil. If it repeats, turn off power to the range for the time printed in your own manual (5 minutes in the range manuals, up to 30 seconds in the code guide), set the clock and test once more.

Is F0 the same as F5?

We cannot say. Frigidaire describes neither for ranges, so each has its own page. Only F1 is explained there, so check which one you actually see.

When should I book a visit for F0?

Arrange a technician when F0 is still on after the power reset, the clock step and a second Bake or Broil test, or when the oven has stopped heating.

Is my gas range covered by the recall?

Some Frigidaire gas ranges are. CPSC recall 26-333 (March 19, 2026) covers delayed bake-burner ignition on listed models and serial numbers, so check your model and serial against the recall notice.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.