Independent appliance repair

Frigidaire range repair, with care.

We repair freestanding Frigidaire ranges, whether gas, electric or induction: burners that stay dark, elements that stay cold, an oven that ignores the clock, a control code on the display. Give us the fuel type and the symptom, then book a technician.

Stainless steel gas range with five burners, knobs and a glass oven door, set between wood cabinets and a stone-tile backsplash.
Independent service. Considered care.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work
RefrigeratorsWall ovensDishwashersWashersDryersFreezersCooktopsRangesError code helpWarranty on our workmanship

Call it in tonight.
Cook on it tomorrow.

Three short stages.
Plain, and kept short.

  1. Technician in a dark uniform carrying a toolbox into a warm kitchen
    1

    Book it online

    Pick the appliance, describe the problem and add the model number if you have it. The booking form is open 24/7.

  2. Hands twisting a white water filter into the upper corner of a refrigerator
    2

    We test it on site

    The technician checks the range, fridge or washer, explains what failed and quotes the repair before starting.

  3. Warm walnut kitchen with a stainless French-door refrigerator and granite counters
    3

    Back to normal

    Parts are fitted, the work is tested, and you see the appliance running before the technician leaves.

Prepare for the range visit.

  1. 1

    Smell gas? Stop first

    Gas smell: the gas range manual rules out lighting anything, touching switches or phoning from inside. Leave, then ring the gas supplier from next door; the fire department is the fallback.

  2. 2

    Check the recall

    Some gas ranges sold June 2025 to January 2026 are in CPSC recall 26-333 (delayed bake burner ignition). If the serial on the drawer nameplate fits, the oven stays off. The cooktop burners can still be used.

  3. 3

    Set the clock

    A gas range's oven will not run until the time of day is set. Also check the gas regulator is on and the cord is seated, since an electric igniter needs power.

  4. 4

    Clean the burner ports

    With the burner cold and off, clear the head slots and ignition ports with a needle or small wire. Seat each cap flat. The manual blames coastal salt air for a faintly orange flame.

  5. 5

    Match the pan to the cooktop

    Induction needs a magnet to stick to the pan bottom: cast iron or steel work, aluminum, copper and glass do not. On a glass-ceramic top, use flat, medium-weight cookware.

  6. 6

    Reset a control code

    Press OFF and run bake or broil again. If the code reappears, cut power for 5 minutes, repower and reset the clock. Owner Center pages give a shorter 30-second reset. Write the code down.

Leave internal testing to a technician.

A burner stays dark although its ports are clear and its cap sits level.

The oven burner lights late, with a puff, or the range is in the recall serial range.

The control code reappears after a restart and a reset clock.

A surface element stays cold, heats unevenly with good flat pans, or an induction zone ignores a magnetic pan.

Gas lines, wiring and the range interior stay with the technician. A gas smell means leave first.

Arrange a diagnostic

Real scope. Clear expectations.

9US metro areas
8Appliance types
38Code explanations

The agreement comes first.

Before work starts

The technician quotes the work to you at the visit, after looking at the appliance, and nothing is done until you say yes.

Workmanship coverage

If Frigidaire’s warranty covers the problem, Frigidaire does that repair. Work we do is covered by our own workmanship warranty.

Here to help

Good questions.
Clear answers.

Talk to our team
Which Frigidaire ranges does this page cover?

Freestanding gas, electric and induction ranges. Wall ovens are handled on the ranges and ovens page, so tell us which one you own when you book.

My gas oven lights late. What now?

Stop using the oven. A delayed bake burner is the hazard in recall 26-333. Cooktop burners can stay in use. Book us to inspect it, and check your serial against the recall list.

Does the burner need the clock set?

The oven does. A gas range will not run its oven until the time of day is set. The cooktop burners are separate, and the manual allows lighting them manually in an outage.

Why won't my induction zone heat?

Probably the pan. Hold a magnet to its base: if it clings, the pan suits induction. Cast iron, steel and enameled steel pass; aluminum, copper, brass, glass and ceramic fail.

Is a recall repair something you do?

No. Recall work and any repair under the manufacturer's coverage belong to the manufacturer. For anything else on your range, book a technician and agree the price first, before any work begins.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.