Read the whole display
Say whether the washer loads from the top or the front, and copy the message exactly. E4 here means out of balance, but the same letters mean something else on a dryer.
Model-specific code library
Top-load washers show E and F codes that the manual explains. Current front-load washers show AL codes instead, so the old E-series searches for front-loaders find no meaning in Frigidaire's own documents.
Washer codes on Frigidaire models are still being checked against the manuals. Your owner’s guide lists the ones for your unit.
Read the research statusCodes differ from model to model; your manual has the final word.
We did not use the Electrolux knowledge base for front-load codes. E11, E21, E23, E35, E43, E47, E56, E57, E58 and E59 are not in any Frigidaire document we read, and the washer code video article cannot be cited as text.

Top-load washers show E and F codes that the manual explains. Current front-load washers show AL codes instead, so the old E-series searches for front-loaders find no meaning in Frigidaire's own documents.
We did not use the Electrolux knowledge base for front-load codes. E11, E21, E23, E35, E43, E47, E56, E57, E58 and E59 are not in any Frigidaire document we read, and the washer code video article cannot be cited as text.
Say whether the washer loads from the top or the front, and copy the message exactly. E4 here means out of balance, but the same letters mean something else on a dryer.
A washer that is flooding or leaking needs the water off and the plug pulled first. Motors, lid locks and boards are for a technician.
On a top-load Frigidaire, the usual cause is an unbalanced load or a lid that isn’t closed. Frigidaire’s tub-not-spinning article says to power off, wait for the lid to unlock, rearrange the clothes and restart. After that it checks load size, shipping materials, level and hose connections.
On a top-load Frigidaire, check the drain hose and standpipe first, then detergent. E2 means the unit took over 10 minutes to drain. Frigidaire’s article asks if the washer has been moved, if the hose is kinked, and if the standpipe is the right height.
Work through Frigidaire’s list: level, Start pressed, Delay Start, lid closed, power, water and breaker. A washer left on for more than 10 minutes without Start pressed switches itself off. On top-load models the lid must be fully closed, and CL means it was left open with Child Lock on.
Follow the instructions written for your own model. See how we research these pages.
We did not use the Electrolux knowledge base for front-load codes. E11, E21, E23, E35, E43, E47, E56, E57, E58 and E59 are not in any Frigidaire document we read, and the washer code video article cannot be cited as text.
Take a photo of the whole washer display and of the model label. Add what the appliance was doing at the time, and skip explanations written for other appliances.
An old search phrase is not proof of what a code means. When our washer sources do not explain a message, we keep its name as written and point you to help, without naming a part or a cause.
Open the washer documents in this library and check the models listed on their covers against your label. A different model calls for its own instructions.