Frigidaire washer E51 / Washer

Frigidaire washer
error E51

Frigidaire's current washer guides do not print E51. The top-load table covers E1 to E5, E7, F2, F5, F8, Fd, C9 and CL, and the front-load guide uses AL alarms. Reset the washer, check hoses and taps, and book a visit if E51 keeps coming back.

No meaning given in the documents we checked

Last reviewed

E51
Washer
Manual evidence

What the manual says about Frigidaire washer E51.

Manual evidence

The top-load guide A29259301 prints E1 to E5, E7, F2, F5, F8, Fd, C9 and CL. The front-load guide A33032801 prints AL 10, AL 20, AL 40, AL 91, AL F0 and AL H0. E51 appears in neither.

Safe first steps.

  1. 1

    Cancel and restart

    Stop the cycle with Cancel, or on a front-load turn the knob to its 12 o'clock reset position. Cutting power briefly also works. Then start a short cycle and watch for E51.

  2. 2

    Look at taps and hoses

    Open both taps all the way, straighten any kinked inlet hose and see that the drain hose has no pinch or kink. The guide starts its fill problems with these same steps.

  3. 3

    Check that it sits level

    Push down on each top corner. A washer that rocks can trip balance messages, and the guide asks you to relevel it before anything else.

  4. 4

    Act on any leak

    If water shows around the washer, close both taps and unplug it before you do anything else.

Note these details before you book.

White front-loading washer in a bright laundry room with shelves of towels
  • Model and serial number
  • Full display text
  • When the message appears
  • Steps you have already taken

When to call.

E51 returns after the reset, the washer stalls mid-cycle without filling, emptying or spinning, or water shows around the cabinet.

Book a visit(844) 481-0454

The documents we checked.

Source 1

Front Load Washer Use & Care Guide, A33032801

Frigidaire / Electrolux / July 2026 / PDF p.30 (Alarm codes)

Source 2

All about the Use & Care of your Washer, A29259301

Frigidaire / Electrolux (retailer-hosted copy of the official document) / August 2024 / PDF p.18 (Error codes)

Here to help

Good questions.
Clear answers.

Talk to our team
Does Frigidaire explain E51 on a washer?

No. The guides we hold list other codes and none lists E51, so we can't name a cause for it.

Is E51 an old front-load code?

It may be. Older front-loaders showed E-codes while current ones show AL alarms, but the table that explained them is not among the guides we hold.

Can I keep washing while E51 is showing?

Try one reset and a short cycle. If the washer fills, drains and spins normally, carry on and watch it. If E51 comes back or the cycle stops, book a visit.

What should I write down for the technician?

The model from the label, precisely what the display reads, and the step of the cycle when E51 appeared.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.