Frigidaire washer E56 / Washer

Frigidaire washer
error E56

Frigidaire's front-load washer guide does not print E56. It lists AL alarm codes instead. Reset the washer as the guide describes and ask for a technician if the E-code keeps coming back.

No meaning given in the documents we checked

Last reviewed

E56
Washer
Manual evidence

What the manual says about Frigidaire washer E56.

Manual evidence

The front-load guide A33032801 (July 2026) has an alarm table with AL 10, AL 20, AL 40, AL 91, AL F0 and AL H0, and says any other alarm should be reset first by turning the knob to the 12 o'clock position or powering off and on. E56 is not in that guide or in the top-load washer table (A29259301).

Safe first steps.

  1. 1

    Reset the washer

    Frigidaire's current front-load guide suggests the knob's reset position (12 o'clock) or cutting power and restoring it, then watching for the code.

  2. 2

    Confirm the water side

    If the washer is not filling or draining, look at the tap, the hoses for kinks and the drain hose, as the AL 10 and AL 20 rows suggest. Do this only as a general check.

  3. 3

    Stop at any sign of leaking

    Close the water taps and unplug the washer if water escapes. The anti-flood alarm entry in the guide gives that sequence before calling for service.

Note these details before you book.

White front-loading washer in a bright laundry room with shelves of towels
  • Model and serial number
  • Full display text
  • When the message appears
  • Steps you have already taken

When to call.

An E-code returns after the reset, the washer will not fill, drain or spin, or any water appears around it.

Book a visit(844) 481-0454

The documents we checked.

Source 1

Front Load Washer Use & Care Guide, A33032801

Frigidaire / Electrolux / July 2026 / PDF p.30 (Alarm codes)

Source 2

All about the Use & Care of your Washer, A29259301

Frigidaire / Electrolux (retailer-hosted copy of the official document) / August 2024 / PDF p.18 (Error codes)

Here to help

Good questions.
Clear answers.

Talk to our team
Does Frigidaire say what E56 means on a front-load washer?

No. Frigidaire's current front-load washers show AL codes, and nothing in the guide ties E56 to one of them.

What should I do first when E56 appears?

Turn the knob to the 12 o'clock reset position, or cut power and restore it, then watch whether E56 returns. If the washer is not filling or draining, check the tap and look for kinks in the hoses.

Is E56 the same as E47?

We cannot tell. No Frigidaire source describes either, so listing them near each other is our grouping, not Frigidaire's. Each has its own page.

When should I book a visit for E56?

Ask for a technician when E56 comes back after the reset, the washer will not fill, drain or spin, or water appears around it. If water escapes, close the taps and unplug the washer first.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.