Read the whole display
Give the exact characters, which zone shows them, and whether the knobs are set to OFF.
Model-specific code library
Five displays are decoded: HE and H as hot surface warnings, a double dash for no cookware, Pb for Power Boost, and C0 as the one real error. Only C0 can need a technician.
C0 on the Professional induction cooktop from Frigidaire is an error that appears in zone 1 or 2, on the left. The manual offers no owner fix beyond setting the knobs to OFF. If C0 stays or the knobs stay dead, book a technician.
Read the C0 checks5 researched cooktop codes. Codes differ from model to model; your manual has the final word.
C0 on the Professional induction cooktop from Frigidaire is an error that appears in zone 1 or 2, on the left. The manual offers no owner fix beyond setting the knobs to OFF. If C0 stays or the knobs stay dead, book a technician.
Needs a technicianA double dash on a knob-control Frigidaire cooktop is not an error. The manual calls it "Cookware not found": the zone is on, but pan detection could not find suitable cookware. Check the pan's material and position, then try again.
Owner checks firstOn Frigidaire's touch-control induction cooktop, H is the Hot Surface Indicator. The zone has been switched off, but the glass keeps heat from the pan. It goes out on its own when the zone is safe, so wait and keep hands off.
No action neededFrigidaire's knob-operated induction cooktop prints HE for Hot Element: the surface has not cooled enough to touch safely. It is a warning, not an error. Stay off the glass until the indicator light is out.
No action neededThe knob-operated Frigidaire induction cooktop uses Pb for Power Boost, which is not an error. It switches on when you move a zone's knob from OFF to Hi, and it speeds up heating of big pots. Turn the knob down when you are ready to cook.
No action needed
Five displays are decoded: HE and H as hot surface warnings, a double dash for no cookware, Pb for Power Boost, and C0 as the one real error. Only C0 can need a technician.
We read the A01704805/A manual for the knob-operated Professional model and the A01704804 guide. Touch-control models may differ from what the knob model shows.
Give the exact characters, which zone shows them, and whether the knobs are set to OFF.
A glass top that shows HE or H is still hot. Set every knob to OFF and wait; if C0 stays, book a visit instead of opening the cooktop.
An uneven flame usually means clogged ports or a cap that is not seated. An orange flame can come from dust in the gas line, which clears in a few minutes, or from a wrong L.P. conversion. A flame set too high points to the knob, the cap or the L.P. kit.
Start at the knob: it must be pressed in and rotated all the way to Lite before the burner catches. Next confirm that the ports are open, the cap sits level, and, where the range has electric ignition, the cord is seated. Only clean ports when the burner is off and cool.
Follow the instructions written for your own model. See how we research these pages.
We read the A01704805/A manual for the knob-operated Professional model and the A01704804 guide. Touch-control models may differ from what the knob model shows.
Take a photo of the whole cooktop display and of the model label. Add what the appliance was doing at the time, and skip explanations written for other appliances.
An old search phrase is not proof of what a code means. When our cooktop sources do not explain a message, we keep its name as written and point you to help, without naming a part or a cause.
Open the cooktop documents in this library and check the models listed on their covers against your label. A different model calls for its own instructions.