What it means
On Frigidaire's touch-control induction cooktop, H is the Hot Surface Indicator. The zone has been switched off, but the glass keeps heat from the pan. It goes out on its own when the zone is safe, so wait and keep hands off.
Frigidaire cooktop H / Mode, not a failure
On Frigidaire's touch-control induction cooktop, H is the Hot Surface Indicator. The zone has been switched off, but the glass keeps heat from the pan. It goes out on its own when the zone is safe, so wait and keep hands off.
Also shown as H
On Frigidaire's touch-control induction cooktop, H is the Hot Surface Indicator. The zone has been switched off, but the glass keeps heat from the pan. It goes out on its own when the zone is safe, so wait and keep hands off.
H is a burn warning, so do not wipe the surface or rest anything on it.
H stays lit well after the glass feels cool to the touch.
Your checklist / kept on this device

H is a burn warning, so do not wipe the surface or rest anything on it.

The guide says the indicator stays visible until the cooking zone cools to a safe temperature.

Check that no power level is lit beside the H.

If it still glows after a very long cool-down, note your last cooking time and book a visit.
Tell us the model and what you have already checked, and start the request right here.
Book a visitSimplified schematic; real layouts differ by model. Tap an outlined part for its photo and the check that goes with it.
The use and care guide says a zone you have switched off can stay hot from the cookware on it. The Hot Surface Indicator, shown as H, appears and remains until the zone is safe to touch.
Read the supporting manualNot necessarily. A zone can be off with H showing, so look for a lit power level next to it.
Read the supporting manualThe guide's control description says the setting display shows Hot when heat is detected in a zone that has been turned off, and keeps it until the surface has cooled enough.
Read the supporting manualManufacturer document
Frigidaire / Electrolux
No edition date printed (file dated November 2021) / PDF p.12 (Hot Surface Indicator)
Manufacturer document
Frigidaire / Electrolux
No edition date printed (file dated November 2021) / PDF p.16 (setting indicator: Hot)
Touch-control Frigidaire induction cooktop, Use & Care A01704804. The knob-control Professional cooktop prints HE instead.
The guide gives no time. It lasts until the zone has cooled, which depends on the pan and how long you cooked.
No. It is a safety indicator, so do not try to defeat it.
No. If nothing has been heated recently, the sensing may be misreading the glass, and a technician can check that.
Yes, in effect. The knob-control Professional model prints HE for the hot-surface warning instead.
Code / problem / part / repair
Frigidaire's knob-operated induction cooktop prints HE for Hot Element: the surface has not cooled enough to touch safely. It is a warning, not an error. Stay off the glass until the indicator light is out.
An uneven flame usually means clogged ports or a cap that is not seated. An orange flame can come from dust in the gas line, which clears in a few minutes, or from a wrong L.P. conversion. A flame set too high points to the knob, the cap or the L.P. kit.
Book a diagnostic for your model, done at your home.
Office addresses and the entry details to have ready.