Before work starts
The technician quotes the work to you at the visit, after looking at the appliance, and nothing is done until you say yes.
Independent appliance repair
We repair Frigidaire gas, electric and induction cooktops with burners that won’t light or heat, or a locked or coded surface. Tell us which burner and what it does, then book a visit.


An uneven flame usually means clogged ports or a cap that is not seated. An orange flame can come from dust in the gas line, which clears in a few minutes, or from a wrong L.P. conversion. A flame set too high points to the knob, the cap or the L.P. kit.

Start at the knob: it must be pressed in and rotated all the way to Lite before the burner catches. Next confirm that the ports are open, the cap sits level, and, where the range has electric ignition, the cord is seated. Only clean ports when the burner is off and cool.
No other researched code is tied to this topic. Check the exact message in your model manual rather than borrowing another code from the library.
See the research statusWe don’t list parts for this appliance up front. The technician names any part after the diagnostic and matches it to your exact model before anything is replaced.

We have no illustrated entry for this part yet. Follow the system named in the explanation and the manual cited for your model; a code by itself never tells you what to replace.
Explore the researched partsThree short stages.
Plain, and kept short.

Pick the appliance, describe the problem and add the model number if you have it. The booking form is open 24/7.

The technician checks the range, fridge or washer, explains what failed and quotes the repair before starting.

Parts are fitted, the work is tested, and you see the appliance running before the technician leaves.
Note which burner, whether it clicks or glows, and whether it fails on every try.
Frigidaire says to clear the ports with a toothpick or a port brush and seat the burner caps.
Check that the safety switch springs back, then swap with a working burner.
Unplug for 30 seconds. If none heat on a new install, it may be wiring or voltage.
Frigidaire asks for flat-bottom, medium-to-heavy pans; induction needs suitable cookware.
Book a visit if a burner still won’t light or heat after the cleaning and reset steps.
Book a visit if F40, F41, F12 or F13 returns after a 30-second power reset.
Gas cooktop: if you smell gas, don’t light anything or touch a switch. Call your gas supplier.
Leave wiring and gas fittings to the technician.
Arrange a diagnosticThe technician quotes the work to you at the visit, after looking at the appliance, and nothing is done until you say yes.
If Frigidaire’s warranty covers the problem, Frigidaire does that repair. Work we do is covered by our own workmanship warranty.
Dirty or blocked ignition ports are Frigidaire’s first suspect, along with burner caps not seated. Clean the ports. If it still won’t light, book a technician.
Frigidaire names it Cooktop Lock Out and gives no cause. It says reset power for up to 30 seconds. If it comes back, book a technician.
Frigidaire says some cookware hums or buzzes on induction, and clicks and fans are normal too. A burner that fails to heat isn’t, so book a visit.
The recall covers the oven bake burner on certain gas ranges, and CPSC says cooktop burners can be used. Check your model on the CPSC notice.
If your unit is under Frigidaire’s warranty, Frigidaire handles that repair. Otherwise book a visit with us; the price is agreed before work.
Code / problem / part / repair
An uneven flame usually means clogged ports or a cap that is not seated. An orange flame can come from dust in the gas line, which clears in a few minutes, or from a wrong L.P. conversion. A flame set too high points to the knob, the cap or the L.P. kit.
Book a diagnostic for your model, done at your home.
Office addresses and the entry details to have ready.