Maintenance

Frigidaire dishwasher rinse aid: filling, the L0–L6 setting and detergent dose

Fill the rinse aid dispenser to the indicated level without overfilling, raise the L0 to L6 setting one step if you see spots and poor drying, and keep the detergent dose matched to your water hardness.

Hand pouring clear liquid from a bottle into the dispenser on an open dishwasher door, with glasses on the upper rack.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work
On this page
Key points
  • L0 to L6 on the status window is the rinse aid level, not an error. 45
  • Fill to the indicated level; overfilling causes oversudsing. 1
  • Three ways to change the level appear in Frigidaire's sources: two keypad combinations and a dial. 167
  • Detergent dose by water hardness: 4, 6 or 8 teaspoons. 3
  • Water into the dishwasher should be at least 120°F (49°C). 67

What does rinse aid do in a Frigidaire dishwasher?#

Rinse aid helps water run off dishes in sheets instead of clinging as droplets, so you get less spotting, less film and better drying. A dispenser beside the detergent cup releases a measured amount during the last rinse. 15

Frigidaire's newer manuals add that rinse aid also lubricates the wash arm bearing so the arm turns properly. 57

You top it up with liquid rinse aid and, on many models, choose how much each cycle releases. That choice is the L0 to L6 setting you may have seen on the display. This guide covers the filling, the setting and the detergent dose that goes with it. 45

Rinse aid is not a detergent#

It only works in the final rinse. The detergent still cleans, and the detergent dose has to be right as well. Both come up below. 13

The drying options#

Rinse aid works together with the drying option. Frigidaire's article and the 117825980A keypad manual say that not selecting AIR DRY, together with rinse aid, improves drying, and that choosing AIR DRY can leave some items wet at the end. 15

The older 2020 manual puts it the other way around: it says the HEAT DRY option, combined with rinse aid, enhances drying. The option names differ between models, so look at what your control panel offers. 6

How do I add rinse aid?#

Open the rinse aid cover, pour liquid rinse aid in until it reaches the indicated fill level, close the cover and wipe up any spills. Don't overfill, because too much causes oversudsing. When the indicator looks clear instead of dark, it's time to refill. 16

On the dial model in the November 2025 manual, you turn the dispenser cap a quarter turn counterclockwise, lift it out, pour to the fill level and put the cap back. 7

  1. 1

    Open the dispenser#

    The rinse aid compartment sits next to the detergent cup. Open its cover. On the dial model, turn the cap a quarter turn counterclockwise and lift it out. 17

  2. 2

    Pour to the fill level#

    Pour liquid rinse aid in until the liquid touches the indicated fill level. Do not overfill. 15

  3. 3

    Close it#

    Press the cover down firmly, or replace the cap. 57

  4. 4

    Wipe up spills#

    Use a damp cloth. Spilled rinse aid can cause foam. 15

How long does a fill last?#

It depends on the setting. The keypad manuals say the dispenser holds enough for 11 to 66 washes. The November 2025 dial model's manual says 35 to 140 washes. 57

The indicator is dark when the dispenser is full and shows clear when it needs filling. 16

Using all-in-one detergent packs#

If your detergent tablets or packs already contain a rinse aid component, the 117825980A manual says to set the rinse aid dispenser to the lowest setting, which it gives as L1. If spots stay, our loading and Quick Wash guide covers the rack side of the problem. 5

How do I change the rinse aid setting (L0 to L6)?#

Hold the buttons your manual names until the status window shows the current level, then press the setting button to step through L0 to L6 and press Start, or wait a few seconds, to save it. The buttons differ by model. 256

Frigidaire's own article says to check your owner's manual because the control varies. 2 Three methods appear in the sources.

Keypad: Normal and Delay#

On the 117825980A keypad manual and the knowledge-base article: press and hold NORMAL and DELAY for 3 seconds until the status window shows the current setting, L0 to L6. Press DELAY to cycle to the level you want. Press START or wait 5 seconds, and the setting blinks while a beep confirms it is saved. 15

Keypad: Rinse Only and Delay Start (2020 manual)#

On the September 2020 use and care guide: press and hold RINSE ONLY and DELAY START for 5 seconds until the status window shows the rinse aid level. Each press of DELAY START raises the level, and after L6 it starts again at L0. Press START or pause for a few seconds to confirm. 6

Dial models#

On dial models the dial is under the dispenser cap. Turn it to a higher number to release more rinse aid. 17

Which level should I choose?#

Raise the level if you see spots and poor drying. Frigidaire's rule is simple: if spotting and poor drying are problems, increase the amount of rinse aid released. The manuals give no table that matches a number to a water type. 15

So change one thing at a time. Raise the level by one step, run a normal load and look at the glasses. A film that cannot be wiped off may be etching from too much detergent in soft water, which rinse aid won't cure. 3

Check these first#

Before blaming the rinse aid, check the things Frigidaire's troubleshooting tables list for spotted or cloudy glassware: water hardness, water temperature, overloading, old detergent, an empty rinse aid dispenser, the wrong detergent amount and low water pressure. 7

Water entering the dishwasher should be at least 120°F (49°C), and the hot water line pressure should be between 20 and 120 psi. Run the hot tap nearest the dishwasher for a few minutes before you start a cycle. 67

Plastic and bowls#

Frigidaire notes that plastic items may need towel drying, and that bowls and cups with concave bottoms should be angled down so water can drain. 7

How much detergent should I use?#

It depends on your water hardness. For soft water (0 to 3 grains) Frigidaire shows 4 teaspoons, filling the cup to the first line; for medium (4 to 8 grains) 6 teaspoons, second line; for hard water (9 to 12 grains) 8 teaspoons, a full cup. 3

Too little detergent can leave poor cleaning and a hard water film or spots. Too much in soft water can etch glassware, which looks like a film that cannot be wiped off. 3

Water hardnessAmountDispenser cup level
Soft (0–3 grains)4 teaspoonsFirst line
Medium (4–8 grains)6 teaspoonsSecond line
Hard (9–12 grains)8 teaspoonsFull

For tablets or packets, put a single one into the detergent compartment. Use fresh household automatic dishwasher detergent, add it just before you start the cycle and store it cool and dry, since caked detergent may not dissolve. 37

The November 2025 manual warns that industrial-grade detergent can damage the heating coil and other parts. Use household grade only. 7

Your local water company can tell you your hardness in grains per gallon. 3

The filter matters too#

If dishes come out dirty or with grit, rinse aid won't fix it. Frigidaire's manual says the cylinder fine filter has to be cleaned to keep wash performance up. 5

When should I book a technician?#

Book a visit if dishes stay wet or spotted after you've filled the dispenser, raised the setting, used the right detergent amount and checked water temperature and pressure, or if the display shows an error code and not an L0 to L6 level. 47

Don't try to open the dispenser housing or the door panel. The manuals' owner steps stop at the rinse aid cap, the dial and the control-panel setting. 57

You can book a visit, read about our dishwasher service or see the dishwasher not drying page. The technician agrees the price with you before any work starts. The exact cost is confirmed after the on-site diagnostic. Repairs covered by Frigidaire's warranty go through Frigidaire itself. We give a warranty on our workmanship.

Sources#

  1. Dishwasher Rinse Aid GuideFrigidaire / Electrolux · Owner Center knowledge-base article (undated) · Whole article
  2. Dishwashers - Can I adjust the rinse aid dosage used during a cycle on my dishwasher?Frigidaire / Electrolux · Owner Center knowledge-base article (undated) · Whole article
  3. Dishwasher - Dispenser and Detergents GuideFrigidaire / Electrolux · Owner Center knowledge-base article (undated) · Whole article (dose, tips)
  4. What do I do if my dishwasher is showing a message code?Frigidaire / Electrolux · Owner Center knowledge-base article (undated) · Whole article (L0-L6)
  5. User Manual, Dishwasher, 117825980AFrigidaire / Electrolux · Current edition (28 pages, no date printed) · PDF pp. 9, 16, 17, 21, 22
  6. Dishwasher Use & Care Guide, A117867311Frigidaire / Electrolux · September 2020 (24 pages) · PDF pp. 9, 16
  7. Dishwasher Use & Care Guide, A23587501BFrigidaire / Electrolux · November 2025 (24 pages) · PDF pp. 13, 16, 17

Here to help

Good questions.
Clear answers.

Talk to our team
What do L0 to L6 mean on my Frigidaire dishwasher?

They show the rinse aid dosage level on models with a status window. It's a setting, not an error. Press the buttons your manual names to change it. See source 4 and source 5, page 9.

How do I raise the rinse aid setting?

On the keypad models in the knowledge-base article, hold NORMAL and DELAY for 3 seconds, press DELAY to choose L0 to L6, then press START. Other models use a different button pair or a dial. See sources 1 and 6.

Can I overfill the rinse aid dispenser?

No. Frigidaire says not to overfill because it can cause oversudsing. Pour to the indicated fill level and wipe up any spill with a damp cloth. See source 1 and source 5, page 16.

What setting for all-in-one detergent packs?

If the packs contain a rinse aid component, the keypad manual says to set the dispenser to its lowest setting, which it gives as L1. Your own manual has the final word. See source 5, pages 16 and 17.

Should I use Air Dry with rinse aid?

Frigidaire's article says not choosing Air Dry, together with rinse aid, improves drying, and that Air Dry can leave some items wet. See sources 1 and 5.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.