Troubleshooting

Frigidaire dishwasher sounds: which are normal and which need a visit

Most dishwasher sounds are part of a normal cycle. Frigidaire's noise guide lists hissing from the water valve, humming from the wash and drain pumps, clunks from the detergent cup and ball valve, and whooshing spray arms. A knock or bang usually means something is hitting a spray arm.

Stockpot tilted in a dishwasher lower rack with its long handle reaching down toward the spray arm below.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work
On this page
Key points
  • Hissing, humming, clunking from the dispenser and whooshing arms are listed as normal. 12
  • A knock or bang usually means a dish, pan or utensil is hitting a spray arm. 13
  • A pause in sound while the wash switches between arms is normal. 34
  • Standing water in the tub after a cycle is not normal and is a drain issue, not a noise issue. 3
  • Frigidaire's sources list normal sounds. They do not diagnose abnormal ones, so we do not guess. 12

Which Frigidaire dishwasher sounds are normal?#

Most of them. Frigidaire's noise guide lists hissing from the water valve, humming from the wash and drain pumps, clunking from the detergent dispenser and ball valve, and whooshing as the spray arms switch. Water filling, circulating and the motor running are normal too. 12

Here is the guide's list, with the moment in the cycle when you hear each one:

SoundSource in the guideWhen you hear it
HissingWater valveUsually the first sound, as water goes through the valves 2
HummingWash pumpStarts and stops as the spray arms alternate 2
HummingDrain pumpSteady at first, then changing as the last water goes 2
ClunkingDetergent dispenserOnce a cycle, when the detergent is released 2
ClunkingBall valveCan occur as the spray arms alternate 2
ClunkingSpray armIf a tall item is hitting the arm 2
WhooshingSpray armsAs they switch between the bottom and the top; the sound changes 2
Fan noiseEven Dry or Perfect Dry fan (some models)At various times during the cycles 1

The guide is a list of normal sounds, and that is how we use it. It does not tell you what a failing part sounds like, and a clunk from the spray arm is the one row that comes with an action. We come back to that below.

What does a normal cycle sound like, step by step?#

You may hear the drain motor first, then water splashing into the tub, then the lower arm turning and circulating water, a short pause, and a slightly different sound as the upper arms spray. The change in sound as the wash switches arms is normal. 35

The use and care guides walk through it in that order. As each cycle begins, you may or may not hear the drain motor. The next sound is water entering the tub. Then the lower arm rotates and circulates water, followed by a pause and a slightly different sound as the upper arms spray. 35

  1. 1

    Start: drain motor, then a hiss#

    You may or may not hear the drain motor as the cycle begins. The water valve hisses as water enters. 23

  2. 2

    Splash and lower arm#

    Water splashes into the tub, then the lower arm rotates and circulates it. 35

    Open dishwasher with empty racks between walnut kitchen cabinets
  3. 3

    A pause, then the upper arms#

    The dishwasher pauses with no sound while the wash switches arms, then you hear a slightly different sound from the upper arms. 34

  4. 4

    Drain at the end#

    The drain pump hums, steady at first and then changing as the last water goes. 2

One more detail from the E-code platform manual: the wash motor often pulsates throughout the cycle, which varies water pressure. A pulse in the hum is part of the design. 4

Why does my new dishwasher sound different from my old one?#

Because it is quieter by design. Frigidaire's use and care guides say the dishwasher does not sound like most dishwashers, uses energy efficient motors for the wash and drain, and that compared with older models you may be surprised at what you do not hear. 35

The guides give no decibel figure, so we cannot tell you how loud is too loud. What they do give is the list of sounds above, and the detergent clunk or a hiss from the valve is on it. 23

The same page notes that energy efficient units run long cycles, because the design leans on the factors that use less energy. A long cycle is not a loud one. If the cycle length is what bothers you, that is a separate question. 3

What do I do about knocking, banging or rattling?#

Check whether a dish, pot, pan or utensil is blocking a spray arm. Frigidaire says that is what to look for when you hear knocking or banging. Stop the cycle, then turn each arm by hand and move anything that stops it. 16

This is the one sound that Frigidaire's articles hand you a task for, so do it carefully:

  1. Stop the cycle and open the door. Let the wash finish its current phase if you can; open slowly, since hot water may splash.
  2. Spin each spray arm by hand. The loading guide says to check the loaded items do not interfere with arm rotation by turning it by hand. 6
  3. Look at tall items. In the lower rack, the guide says to put large items along the edge so they do not block the arm, and to be sure pan handles do not protrude through the bottom of the rack. 6
  4. Look in the upper rack. Be sure nothing protrudes through the bottom of the upper arm. Long-handled knives and utensils can go in the upper rack. 6
  5. Separate delicate items. The loading guide warns that damage may occur if delicate items touch each other during operation. 6

A tall item hitting the arm is also what the noise guide means by a clunk from the spray arms: it can occur if an item is too tall and the arm hits it. 2

Is the noise really a drain or leak problem?#

If you also see water left in the tub, a puddle or an error code, the issue is not the noise. Frigidaire's manual says standing water after a cycle is not normal, and codes such as i20 (not draining) or i30 (leak or overflow) have their own steps. 357

The manual puts it plainly: water left in the tub bottom after the cycle is complete is not normal, and the dishwasher may not be draining properly. Its drain checks include the disposer, the knockout plug and the drain hose, and Frigidaire's code article adds the filter and glass trap. 37

For code i20, Frigidaire lists the following checks: the disposer knockout plug is removed, the drain hose is not blocked, pinched or restricted, the hose is at the correct height (a minimum of 32 inches from the floor), and the glass trap and filter are clear. 7

For i30, the manual describes a leak or overflow of water detected in the bottom pan and points to loose connections at the water inlet valve and the dishwasher being level. 5

Neither article connects a code to a particular sound. If the dishwasher hums as it drains and water stays behind, the hum is on Frigidaire's normal list but the leftover water is not. Treat that as a drain problem, and use the code pages for i20 and i30. 2357

When does a sound mean a visit?#

Book a visit when a sound is not on Frigidaire's normal list and continues after the spray arms turn freely, or when it comes with water left in the tub, a leak or an error code. The sources list normal sounds but do not diagnose abnormal ones. 12

That honesty matters. The documents tell us what a healthy Frigidaire dishwasher sounds like and what to check for knocking. They do not say what a worn pump, a loose motor mount or a damaged arm sounds like, so we will not guess from a description. A technician can listen on site. 12

What helps most when you book is a clear description:

  • When it happens. Start, wash, drain or dry.
  • What it sounds like. Hiss, hum, clunk, whoosh, knock, or something that does not fit the list.
  • What you already ruled out. The spray arms turn freely, the load is clear of them, there is no water left behind and no code.
  • Anything that changed. A recent install, a move, or new racks or dishes.

You agree the price with the technician before work begins, and the final cost is set after the on-site diagnostic. If your unit is under Frigidaire's warranty, Frigidaire handles that repair. Our workmanship is covered by our own warranty.

Ready to schedule? Book a technician. The shorter page on a noisy dishwasher has the quick checklist.

Sources#

  1. Dishwashers - What are normal dishwasher operations sounds? (KB 1847433)Frigidaire / Owner Center knowledge base · Owner Center article, cached 10.11.2026 (no edition date printed) · Article text
  2. Dishwasher - Noise Guide (KB 1928400)Frigidaire / Owner Center knowledge base · Owner Center article, cached 10.11.2026 (no edition date printed) · Article text
  3. Dishwasher use & care guide (A23587501B)Frigidaire / Electrolux · November 2025 (24 pages) · pp. 2, 17–18
  4. User Manual, Dishwasher (117825980A)Frigidaire / Electrolux · Current Bynder edition, no date printed (28 pages) · pp. 19, 22
  5. Dishwasher use & care guide (A117867311)Frigidaire / Electrolux · September 2020 (24 pages) · pp. 2, 9, 20
  6. Dishwasher - Loading Guide (KB 1834625)Frigidaire / Owner Center knowledge base · Owner Center article, cached 10.11.2026 (no edition date printed) · Article text
  7. Dishwasher Error Code i20 - Unit did not drain properly (KB 1830367)Frigidaire / Owner Center knowledge base · Owner Center article, cached 10.11.2026 (no edition date printed) · Article text

Here to help

Good questions.
Clear answers.

Talk to our team
Is a clunk once per cycle normal?

Yes. Frigidaire's noise guide lists a clunk from the detergent dispenser once each cycle, when the detergent is released. A clunk can also come from the ball valve as the spray arms alternate. [2]

Why does my dishwasher go quiet in the middle of a wash?

The use and care guides say it is normal for the dishwasher to pause with no sound while the wash switches between the lower and middle spray arms, and for the sound to change when it does. [3][4]

Is the fan I hear after the wash normal?

On models with the fan-assisted Even Dry or Perfect Dry system, yes. Frigidaire says the fan operating at various times during the cycles is normal. [1]

What does a knocking or banging dishwasher mean?

Frigidaire says to check that no dish, pot, pan or utensil is making a spray arm circulate improperly. Open the door, rotate the arms by hand and move anything that blocks them. [1][6]

Is humming while it drains a problem?

Frigidaire lists humming from the drain pump as normal: usually steady at first, then changing as the last of the water is pumped out. Water left in the tub afterward is a separate issue. [2][3]

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.