Frigidaire dishwasher PF / Power

Frigidaire dishwasher
error PF

Dishwasher / display referencePF

PF means the dishwasher lost power. Press START/CANCEL to clear the code and begin a new cycle. After a hard power failure, the 2020 guide says pressing Start within 18 hours can resume the cycle where it stopped.

Also shown as PF

Last reviewed

Dishwasher / display referencePF
Meaning
PF means the dishwasher lost power. Press START/CANCEL to clear the code and begin a new cycle. After a hard power failure, the 2020 guide says pressing Start within 18 hours can resume the cycle where it stopped.
Who handles it
Owner checks first, then a technician
Source
Dishwasher Use & Care, A117867311

What Frigidaire dishwasher PF means.

What it means

PF means the dishwasher lost power. Press START/CANCEL to clear the code and begin a new cycle. After a hard power failure, the 2020 guide says pressing Start within 18 hours can resume the cycle where it stopped.

What you can safely check

Press START/CANCEL.

When to call a technician

The sources give no call condition for PF; if the dishwasher won't clear it or start again, use your manual's contact guidance.

Your checklist / kept on this device

Safe checks, in order.

0 of 3 checks done
  1. Frigidaire dishwasher PF: Row of small touch buttons and one glowing light along the top edge of a stainless dishwasher door, seen at a low angle.
    Illustration. Follow your model’s instructions.
    Before you begin

    Press START/CANCEL

    Press START/CANCEL. The code clears and you can begin a new cycle.

  2. Open dishwasher tub with the lower rack removed and a shallow pool of water around the cylindrical filter.
    Illustration. Follow your model’s instructions.
    Check 2

    Try to resume after a hard outage

    The 2020 guide says that after a hard power failure, pressing Start within 18 hours picks the cycle up at the point of interruption.

  3. Hand lifting a gray dishwasher spray arm above its hub in an empty tub with the lower rack removed
    Illustration. Follow your model’s instructions.
    Check 3

    Know the soft-failure case

    After a brief power loss the cycle pauses and carries on when power returns, provided the door has not been opened.

Still showing PF?

Tell us the model and what you have already checked, and start the request right here.

Book a visit

The control and its wiring.

Conceptual dishwasher sectionKeypadControl boardMotor wiringHeater wiring1234
  1. 2Control board
  2. 3Motor wiring
  3. 4Heater wiring

Simplified schematic; real layouts differ by model. Tap an outlined part for its photo and the check that goes with it.

A little more context.

Is PF the same as a tripped breaker?

The sources only say the unit lost power. They don't tie PF to a cause such as the breaker.

Read the supporting manual

Does opening the door matter?

For a brief outage the 2020 guide says the cycle resumes only if the door hasn't been opened.

Read the supporting manual

The manual behind the message.

Manufacturer document

Dishwasher Use & Care, A117867311

Frigidaire / Electrolux

September 2020 / PDF p.9 (Error Code table)

Manufacturer document

Dishwasher Error Code PF - Loss of Power (KB 1831282)

Frigidaire / Owner Center knowledge base

Owner Center article, cached 10.11.2026 (no edition date printed) / Article text

Manufacturer document

Dishwasher Error Codes and Alarms Guide (KB 1829620)

Frigidaire / Owner Center knowledge base

Owner Center article, cached 10.11.2026 (no edition date printed) / Article text

Manufacturer document

User Manual, Dishwasher, 117825980A

Frigidaire / Electrolux

No date printed / PDF p.10, section 4.5 Error Codes

PF is described in the status section of the 2020 Use & Care guide, not in its i-code table. The newer manual has no separate PF row, so check your own manual.

Here to help

Good questions.
Clear answers.

Talk to our team
Does PF mean the dishwasher is broken?

The sources describe it as a loss of power, with START/CANCEL clearing it. They name no failed part.

Will it finish the cycle on its own?

After a soft power failure, the 2020 guide says the cycle pauses and resumes when power returns if the door hasn't been opened. After a hard one, you press Start.

How long do I have to restart?

The 2020 guide says within 18 hours after a hard power failure, and the cycle continues from where it stopped.

What if PF keeps appearing?

The sources don't give a call condition. If it returns without any outage, book a technician using the details in your manual.

Let’s take care of it.

The range is the heart
of the kitchen. Let’s fix it.