On this page
- 12:00 flashing is the normal reaction to interrupted power, not an error code. 123
- The range manuals say the oven will not run until the time of day is set. 12
- If the power fails while the oven is on, switch it off first, then reset the clock and the function. 13
- A 12-hour or 24-hour display is a setting, not a clock problem. 12
- A clock that resets with no outage is not explained in the manuals, so book a visit. 123
Why is my Frigidaire oven flashing 12:00?#
The control has lost power and forgotten the time. Frigidaire's range and wall oven manuals say the display flashes 12:00 when the appliance is first plugged in or when its power supply has been interrupted. It is not an error code, and it clears once you set the time. 123
That makes a flashing 12:00 an ordinary thing for an oven to do after a storm or a tripped breaker. Nothing in the manuals treats it as damage. The control starts over at 12:00 and waits for you to set the time.
The manuals do not describe how long an interruption has to last, and they do not say whether a flicker counts. They only say "interrupted." So if the display is flashing and you remember the lights blinking, trust the display.
Two details are worth knowing before you touch anything:
How do I set the clock on a Frigidaire range?#
On the electric and gas ranges, press the Settings key, scroll to CloC, press START, set the time with the Up and Down arrows and press START again. Because 12:00 is already flashing, the manuals let you skip straight to the arrows. 12
The range manuals number the steps like this. Hold an arrow down to move faster.
- 1
- 2
- 3
- 4
The manuals add that after an interruption you can skip ahead to the arrow step, because the display already shows the flashing 12:00. You still press START at the end to save the time. If your control looks different, follow the keys pictured in your own manual. 12
What about a wall oven?#
Wall ovens have a touch display. The wall oven manual says to touch the Menu Options bars, scroll to Clock, touch Set Clock, set the time on the screen, pick AM or PM and touch Save & Close. The same screen can turn the clock display off when the oven is not in use, and can change between 12-hour and 24-hour time. 3
That "display off" option is worth a look if the screen looks blank rather than flashing. A hidden clock is a setting. A flashing 12:00 is a power interruption. 3
How do I switch between 12-hour and 24-hour time?#
The range manuals give a separate setting for this, named "Hour." Press Settings, scroll to Hour, press START, use the arrows to pick 12 hr or 24 hr and press START to confirm. The pre-set mode is 12 hours. A reading like 13:00 means 24-hour mode is on. 12
Here is the range at a glance, as the manuals list it:
| Mode | Smallest value | Largest value |
|---|---|---|
| 12 hr | 1:00 | 12:59 |
| 24 hr | 0:00 | 23:59 |
One thing to watch. In the electric range manual, the settings list says "CLoC" sets the clock to 12-hour or 24-hour mode, while the numbered steps use "Hour" for the display mode and "CloC" for setting the time. The two pages do not quite agree on what each label does. If one menu entry does not do what you expect, try the other, and read the display as you go. 12
The same menu can also restore every user preference to its original setting (rSEt), switch the display between Fahrenheit and Celsius (F-C), and silence the key tones (Aud). If the 12/24-hour change did not stick, check that nothing was reset. 12
Does the oven work before I set the clock?#
No. The electric and gas range manuals list "The time of day is not set" as a reason the oven section does not operate, and say the clock must be set for the oven to run. Set the time first, then choose Bake or Broil again. 12
So an oven that will not heat after an outage may just be waiting for the time. It is the first thing to try.
Delay Start is stricter still. The wall oven manual says to be sure the time of day is set correctly before you program a delay start, and it gives a one-hour maximum for a normal delay. 3 Our timers and Delay Start guide walks through those keys on a range.
The 12-hour shutoff#
Both range manuals and the wall oven manual describe a built-in energy saving feature that shuts the oven off if it has been on for more than 12 hours. It can be switched to continuous bake through the settings. If your oven turned itself off overnight, that is the feature working, not the clock. 123
After an oven light change#
Changing the oven bulb means switching the power off, and the electric range manual ends that job with "Be sure to reset the time of day on the clock." The wall oven manual repeats that reminder in its bulb steps. A 12:00 after a bulb change is expected. 13
What if an F or E code appears with the 12:00?#
Press OFF to clear it and try Bake or Broil. If the code returns, cut power to the appliance, wait 5 minutes, restore power, set the clock and run the function again. If it still comes back, press OFF to clear it and book a visit. 12
That is Frigidaire's own reset sequence for ranges, printed in the troubleshooting table. The manuals do not explain what each code means in that table. For a specific code, look it up on our oven error codes page.
Switching off the power means the breaker or the plug, not just the OFF key. Expect the clock to flash 12:00 afterwards, which is why the manual tells you to set it as part of the sequence. 12
A short sequence you can keep on the fridge:
- Press OFF and try the function again.
- Open the oven's breaker and wait 5 minutes.
- Restore power, set the clock and run the function again.
- If the same code returns, book a visit.
When does a resetting clock mean a service visit?#
When the time keeps disappearing and the rest of the house kept power, or when the keypad does not respond after you reset. The manuals describe the 12:00 only as a reaction to interrupted power, and they do not explain a clock that resets on its own, so that is a question for a technician. 123
Before you book, rule out the simple things the manuals name. Check that the power cord is plugged in tightly and that the fuse or breaker for the circuit is active. A tripped breaker can also be the reason for a "dead" oven after a storm. If the power is out in the neighborhood, the manuals say to call the electric company, not a repair service. 123
Here is a quick way to match what you see to what to do.
| What you see | What it points to | What to do |
|---|---|---|
| Flashing 12:00, oven otherwise normal | Power was interrupted | Set the clock; no repair needed |
| Time reads 13:00 or 17:45 | 24-hour mode is on | Change the Hour setting back |
| Oven will not heat, clock never set | Time of day not set | Set the clock, pick the function again |
| Clock blank, lights in the house on | Clock display may be off (wall oven) | Turn the clock display back on in Menu Options |
| Flashing 12:00 several times a day, no outage | Not explained in the manuals | Note the dates and book a visit |
| F or E code after the reset | Control detected an error | Press OFF, 5-minute power reset, then book |
If your oven is a gas range, one more recall item is worth a minute: Frigidaire gas ranges are covered by a 2026 U.S. Consumer Product Safety Commission recall about delayed ignition of the bake burner. Check the notice for your model on the CPSC recall page.
You agree the price with the technician before work begins, and the final cost is set after the on-site diagnostic. If your unit is under Frigidaire's warranty, Frigidaire handles that repair. Our workmanship is covered by our own warranty. When you are ready, book a technician, or see the short triage on our oven clock and timer problems page.
Sources#
- User Manual, Electric Range (A30923902)Frigidaire / Electrolux · Current Bynder edition, no date printed (20 pages) · pp. 4, 10, 16–17
- User Manual, Gas Range (A30923903)Frigidaire / Electrolux · Current Bynder edition, no date printed (20 pages) · pp. 4, 10, 16–17
- User Manual, Wall Oven (A30904902)Frigidaire / Electrolux · Current Bynder edition, no date printed (28 pages) · pp. 4, 8, 10, 18, 21, 23



