Read the whole display
Tell us the exact light or characters, whether an alarm sounds, and whether the freezer is cold.
Model-specific code library
Eight displays are decoded across upright and chest freezers: POWER OUTAGE, HIGH TEMP and DOOR OPEN lights, the green Power On light flashing, Sb, Fb, E2 and HI. Fb and Sb are modes, HI is a high temperature alert, and E2 is a sensor failure on the chest freezer.
The DOOR OPEN light on a Frigidaire freezer lights once the door has stood open for five minutes or longer, with an alarm until you close it. Push the door shut and look for anything propping it open.
Read the DOOR OPEN light checks8 researched freezer codes. Codes differ from model to model; your manual has the final word.
The DOOR OPEN light on a Frigidaire freezer lights once the door has stood open for five minutes or longer, with an alarm until you close it. Push the door shut and look for anything propping it open.
Owner checks firstE2 on a Frigidaire chest freezer is a temperature sensor failure. A service provider is who the manual names. Check the plug and the lid, protect your frozen food, and book a technician.
Needs a technicianFb on the display of a Frigidaire chest freezer means Freeze Boost is on. Fb is an optional boost you started yourself. Press the Freeze Boost button once more to switch it off.
No action neededA flashing green Power On light on a Frigidaire freezer is normal right after you plug it in. It flashes until the freezer reaches the selected temperature. Wait it out.
No action neededA Frigidaire chest freezer that shows HI is giving its High Temperature Alert: the temperature has gone above the set level. Press any button to clear it, keep the lid closed, and check the food.
Check the foodA red HIGH TEMP light with an alarm on a Frigidaire freezer means the cabinet rose above its safe range. Shut the door, inspect the food, and press HIGH TEMP to reset. A repeat means booking a technician.
Check the foodThe POWER OUTAGE light on a Frigidaire freezer reports that power was cut and the inside may have warmed past its safe range. Check your food first, then press POWER OUTAGE to reset the alarm.
Check the foodSb on a Frigidaire freezer's display means Sabbath mode is on. Sb is an observance setting that someone turned on. Holding minus and TEMP F/C for five seconds exits it.
No action needed
Eight displays are decoded across upright and chest freezers: POWER OUTAGE, HIGH TEMP and DOOR OPEN lights, the green Power On light flashing, Sb, Fb, E2 and HI. Fb and Sb are modes, HI is a high temperature alert, and E2 is a sensor failure on the chest freezer.
Three guides are read, A16366303, A29320902 and the chest freezer manual A31283301. A model outside those guides may print other codes.
Tell us the exact light or characters, whether an alarm sounds, and whether the freezer is cold.
Check food for safety whenever POWER OUTAGE or HIGH TEMP has lit. Leave sensors and wiring to a technician.
Frigidaire's article runs through install and power first, then the setting, a recent outage, the location, the door seal, frost and overloading. The suggested freezer setting is 0 F. If the unit has run for 24 hours and is still not cold, schedule service.
Frigidaire links freezer odors first to how food is stored: strong-smelling foods that are not covered tightly, or containers and wraps (paper, foil, plastic) that carry a smell. After that, clean the interior with a sponge, warm water and baking soda.
Follow the instructions written for your own model. See how we research these pages.
Three guides are read, A16366303, A29320902 and the chest freezer manual A31283301. A model outside those guides may print other codes.
Take a photo of the whole freezer display and of the model label. Add what the appliance was doing at the time, and skip explanations written for other appliances.
An old search phrase is not proof of what a code means. When our freezer sources do not explain a message, we keep its name as written and point you to help, without naming a part or a cause.
Open the freezer documents in this library and check the models listed on their covers against your label. A different model calls for its own instructions.