What it means
E2 on a Frigidaire chest freezer is a temperature sensor failure. A service provider is who the manual names. Check the plug and the lid, protect your frozen food, and book a technician.
Frigidaire freezer E2 / Temperature sensors
E2 on a Frigidaire chest freezer is a temperature sensor failure. A service provider is who the manual names. Check the plug and the lid, protect your frozen food, and book a technician.
Also shown as E2
E2 on a Frigidaire chest freezer is a temperature sensor failure. A service provider is who the manual names. Check the plug and the lid, protect your frozen food, and book a technician.
Seat the cord firmly in its socket and close the lid.
E2 stays on the display.
Your checklist / kept on this device

Seat the cord firmly in its socket and close the lid.

If the cabinet will not stay cold, our general advice is to move important items to a working freezer.

Sensors sit behind covers. That work belongs to a technician.
Tell us if the freezer keeps running cold, so we can plan the visit.
Tell us the model and what you have already checked, and start the request right here.
Book a visit
Simplified schematic; real layouts differ by model. Tap an outlined part for its photo and the check that goes with it.
The chest freezer manual labels E2 a temperature sensor failure and directs you to a service provider.
Read the supporting manualThe manual does not say. If the appliance stops operating it points to the troubleshooting table and, failing that, to service.
Read the supporting manualThe operation table blames a loose cord, a fuse, the breaker or an outage when a freezer is dead.
Read the supporting manualManufacturer document
Frigidaire / Electrolux
December 2025 / PDF p.11 (E2: Temperature sensor failure)
Manufacturer document
Frigidaire / Electrolux
December 2025 / PDF p.11-12 (8.1 Appliance Operation)
Chest freezer manual A31283301 (December 2025), troubleshooting and failure-code lines.
The manual lists no reset. Unplugging briefly costs nothing, but a real sensor failure will return.
That depends on whether the freezer is cooling. Check the contents, and use a food thermometer if you own one.
This comes from the convertible chest freezer manual A31283301. Upright Frigidaire freezers use a different alarm display.
The manual names no part, so we diagnose before replacing anything.
Code / problem / part / repair
A Frigidaire chest freezer that shows HI is giving its High Temperature Alert: the temperature has gone above the set level. Press any button to clear it, keep the lid closed, and check the food.
Frigidaire's article runs through install and power first, then the setting, a recent outage, the location, the door seal, frost and overloading. The suggested freezer setting is 0 F. If the unit has run for 24 hours and is still not cold, schedule service.
Book a diagnostic for your model, done at your home.
Office addresses and the entry details to have ready.