What it means
A Frigidaire chest freezer that shows HI is giving its High Temperature Alert: the temperature has gone above the set level. Press any button to clear it, keep the lid closed, and check the food.
Frigidaire freezer HI / Temperature and alarms
A Frigidaire chest freezer that shows HI is giving its High Temperature Alert: the temperature has gone above the set level. Press any button to clear it, keep the lid closed, and check the food.
Also shown as HI
A Frigidaire chest freezer that shows HI is giving its High Temperature Alert: the temperature has gone above the set level. Press any button to clear it, keep the lid closed, and check the food.
Leave it shut so the temperature can recover.
HI returns after the lid, setting and loading are checked.
Your checklist / kept on this device

Leave it shut so the temperature can recover.

The manual says any button clears the alert.

Loading a lot of warm food raises the temperature, the troubleshooting table says.

A setting that is too warm is among the causes given.
Tell us the model and what you have already checked, and start the request right here.
Book a visit
Simplified schematic; real layouts differ by model. Tap an outlined part for its photo and the check that goes with it.
The manual says that when the temperature exceeds the set level, the display shows HI, and any button press clears the alert.
Read the supporting manualCauses given: a setting that is too warm, frequent or long lid openings, a misaligned lid, heavy loading with warm food, or a freezer just unplugged.
Read the supporting manualAfter a disconnect the table says the freezer needs 24 hours to cool completely, so allow time before judging.
Read the supporting manualManufacturer document
Frigidaire / Electrolux
December 2025 / PDF p.9 (Temperature Display: High Temperature Alert)
Manufacturer document
Frigidaire / Electrolux
December 2025 / PDF p.11-12 (8.2 Appliance Temperatures)
Chest freezer manual A31283301 (December 2025), troubleshooting and failure-code lines.
They match in meaning. HIGH TEMP is a red light on upright models, and HI is text on the chest freezer.
You can clear it, but check the food and the cause first.
Usually the cabinet is still above the set level. Check the lid seal, then think about what you loaded.
Check it. Soft or thawed packages need care. Follow normal food-safety rules.
Code / problem / part / repair
E2 on a Frigidaire chest freezer is a temperature sensor failure. A service provider is who the manual names. Check the plug and the lid, protect your frozen food, and book a technician.
Frigidaire's article runs through install and power first, then the setting, a recent outage, the location, the door seal, frost and overloading. The suggested freezer setting is 0 F. If the unit has run for 24 hours and is still not cold, schedule service.
Book a diagnostic for your model, done at your home.
Office addresses and the entry details to have ready.